NI-9217

최저가 $1,198.00
부품 번호:
779592-01

4-Channel, 400 S/s Aggregate, 0 Ω to 400 Ω, PT100 RTD C Series Temperature Input Module

개요

The NI-9217 is a resistance temperature detector (RTD) input module. You can configure the NI-9217 for two sample rate modes: high sample rate or high resolution. The NI-9217 is compatible with 3- and 4-wire RTD measurements, and it automatically detects the type of RTD (3- or 4-wire) connected to the channel and configures each channel for the appropriate mode. The module provides per channel current excitation. The NI-9217 features calibration and includes a channel-to-earth ground double isolation barrier for safety, noise immunity, and a high common-mode voltage range.

포함 품목

  • Module
  • NI-9975 16-position screw terminal plug
  • Safety, Environmental, & Regulatory documentation

NI-9217 세부사항

시스템 어드바이저에서 시스템 설정
영업팀에 문의하기
부품 번호 (1) 가격
779592-01

NI Lead Time
12-13 weeks
Maximum Number of Differential Analog Input Channels
4
Conformal Coated
No
Enclosed
Yes
Supported Sensors
PT100 RTD
Analog Input Isolation
250 Vrms Ch-Earth Ground Isolation
Example of Measurement Accuracy
0.15 °C
Maximum Sample Rate
400 S/s
Front Connection Type
Screw Terminal(1)
Supported Hardware Platform
C Series
Number of Analog Input Channels
4
Analog Input Voltage Range
—
Simultaneous Sampling
—
Operating Temperature Range
-40 °C to 70 °C
Bus Connection
C Series
Supported Sensor Type
RTD
제품 설명
NI 9217 4-Ch PT100 RTD 24-bit, 100S/s/ch, Analog Input Module
Lower Cost per Channel Recommendation

NI-9217 액세서리 및 소프트웨어

  • 모델 (부품 번호)
    설명
    이미지
    호환되는 부품 번호
    cRIO-9939 (192692-01)
    NI 9939 Backshell for 16-pos Screw Terminal Connector Block (qty 1)

    액세서리
    779592-01
    제품 세부정보 보기
  • 제품 (부품 번호)
    설명
    권장 사용 사례
    FlexLogger Professional (785748-3501)
    FlexLogger Professional, Subscription License, Download

    Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.

    Key Features

    • Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
    • Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
    • Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
    • Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
    • Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
    • Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
    • CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
    제품 세부정보 보기
    LabVIEW+ Suite (788509-35)
    NI LabVIEW+ Suite, Subscription License, Download

    Recommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.

    The LabVIEW+ Suite includes the following products:

    • NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
    • NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
    • NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
    • NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
    • NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
    제품 세부정보 보기

자원

NI-9217 드라이버 다운로드
NI-9217 시작하기 가이드
NI-9217 교정 절차
NI-9217 치수 도면
NI-9217 제품 인증
NI-9217 메모리 휘발성 설명서
NI-9217 액세서리 가이드
NI-9217 사양

지원

지원 요청
수리를 요청하거나, 교정을 예약하거나, 기술 지원을 받을 수 있습니다. 유효한 서비스 계약이 필요할 수 있습니다.
NI 커뮤니티
질문하고 솔루션을 탐색하며 다른 NI 커뮤니티 멤버와의 토론에 참여하십시오.
기술지원 데이터베이스
NI 엔지니어가 작성한 자주 묻는 질문과 일반적인 오류에 대한 문제 해결 팁을 검색할 수 있습니다.
온라인 교육
수백 개의 자율 학습형 강의, 어플리케이션 중심의 학습 경로에 접근하여 제품 설정 길라잡이를 시작하세요.