RMM-5544
790730-01
12-Port, 26.5 GHz Solid-State RF Switch Port Module
개요
The RMM-5544 is a solid-state, bidirectional 4-input to 12-output RF switch matrix designed to extend PXI Vector Signal Transceiver (VST) or combination VST and PXI Vector Network Analyzer (VNA) instruments in PXI benchtop and rackmount applications. The RMM-5544 works with the PXIe-5842 or PXIe-5860 VST individually or when combined with the PXIe-5633 VNA. The RMM-5544 features 26.5 GHz frequency coverage, +30 dBm maximum power handling, direct digital control through compatible VSTs and integrated software control in NI RFmx software. The compact design supports benchtop use and high-density rack integration, with up to four units fitting in a 1U 19-inch rack.
포함 품목
- Module
- 1 m, mini-HDMI-to-mini HDMI cable
- Desktop power supply
- Safety, Environmental, & Regulatory documentation
RMM-5544 세부사항
부품 번호 (1) 가격 | 790730-01 |
|---|---|
| NI Lead Time | 27-28 weeks |
| Reconfigurable | No |
| Measure Frequency | — |
| Number of Analog Input Channels | 12 |
| Maximum Output Power | +30 dBm |
| Supports Peer To Peer Streaming | No |
| Bus Connection | — |
| Characteristic Impedence | 50 Ohm |
| Crosspoints | — |
| Maximum Carry Current AC | — |
| Max Insertion Loss | +17.7 dB |
| Maximum Resistance | — |
| Maximum Switching Current DC | — |
| Maximum Switching Voltage AC | — |
| Maximum Switching Voltage DC | 12 V |
| Mode (n-wire) | — |
| Number of Banks | 2 |
| Number of Channels | 12 |
| Number of Columns | — |
| Number of Relays | — |
| Number of Resistor Channels | 0 |
| Number of Rows | — |
| Relay Configuration | — |
| Relay Type | — |
| Row Access | Yes |
| Scan Rate | 40000 cycles/s |
| Switch Bandwidth | 26.5 GHz |
| Termination Impedance | — |
| 제품 설명 | 12 Port 26.5 GHz Solid State RF Switch Module |
지원
지원 요청
수리를 요청하거나, 교정을 예약하거나, 기술 지원을 받을 수 있습니다. 유효한 서비스 계약이 필요할 수 있습니다.
NI 커뮤니티
질문하고 솔루션을 탐색하며 다른 NI 커뮤니티 멤버와의 토론에 참여하십시오.
기술지원 데이터베이스
NI 엔지니어가 작성한 자주 묻는 질문과 일반적인 오류에 대한 문제 해결 팁을 검색할 수 있습니다.
온라인 교육
수백 개의 자율 학습형 강의, 어플리케이션 중심의 학습 경로에 접근하여 제품 설정 길라잡이를 시작하세요.