USB-6509
최저가 $878.00
779975-01
96-Channel, 5 V, TTL/CMOS, 24 mA, USB Digital I/O Device
개요
The USB-6509 is an industrial, bus-powered USB device that can directly drive external digital devices such as solid-state relays (SSRs). You can configure each port for input or output, and no external power supply is required for outputs.
Using programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators. If a computer or application fault occurs, the USB-6509 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. Programmable input filters eliminate glitches/spikes and provide debouncing for digital switches/relays through a software-selectable digital filter. The USB-6509 ships with a 1m USB cable.
포함 품목
- Device
- 1 m, USB A 2.0 male-to-USB B 2.0 male USB Cable (192256A-01)
- 4-count, adhesive rubber foot (745120-01)
- Safety, Environmental, & Regulatory documentation
USB-6509 세부사항
부품 번호 (1) 가격 | 779975-01 |
|---|---|
| NI Lead Time | 10-11 weeks |
| Bus Connector | USB 2.0 |
| Number of Bidirectional Digital Channels | 96 |
| Number of Digital Input Only Channels | 0 |
| Number of Digital Output Only Channels | 0 |
| Digital Input Voltage Range | 0 V to 5 V |
| Output Voltage Range | 0 V to 5 V |
| Maximum Clock Rate | — |
| Single-Ended Digital I/O Channel Current Drive | 24 mA |
| Reconfigurable | — |
| Maximum Sample Rate | — |
| Number of Analog Input Channels | — |
| Maximum Digital Update Rate | — |
| Maximum Analog Update Rate | — |
| Number of Analog Output Channels | — |
| Operating Temperature Range | 0 °C to 55 °C |
| Bus Connection | USB 2.0 |
| Current Flow Direction | Sinking Input#Sourcing Input#Sinking Output#Sourcing Output |
| Digital I/O Isolation | — |
| Digital I/O Logic Levels | 5 V TTL |
| Front Connection Type | SCSI Type(1) |
| Number of Counters/Timers | — |
| Number of External Clock Inputs | — |
| Relay Type | — |
| Signaling Type | Single-Ended |
| Supports Peer To Peer Streaming | — |
| Supported Hardware Platform | Computer-Based Device |
| Digital I/O Termination | — |
| Duplex | — |
| Dynamic RAM (DRAM) | — |
| Maximum Acquisition Rate | — |
| Maximum Generation Rate | — |
| Maximum Active Load | — |
| Maximum Data Rate | — |
| Module Width | — |
| Onboard Memory | — |
| Supports Hardware Compare | — |
| Supports PMU | — |
| 제품 설명 | NI USB-6509 96 ch, 5 V TTL/CMOS Digital I/O |
USB-6509 액세서리 및 소프트웨어
- 모델 (부품 번호)설명이미지호환되는 부품 번호SH100M-100M Flex Cable (185095-01)Cable Assy, Type SH100-100-Flex, 1 m779975-01R100M-50F-50F Cable (182762-02)R1005050 Ribbon Cable, 2 m779975-01
- 모델 (부품 번호)설명이미지호환되는 부품 번호SCB-100A (785024-01)SCB-100A Noise Rejecting, Shielded I/O Connector Block779975-01CB-50 (776164-90)CB-50 I/O Connector Block with DIN Rail Mounting without cable779975-01CB-50LP (777101-01)CB-50LP Low-Cost, Unshielded I/O Connector Block779975-01
- 제품 (부품 번호)설명권장 사용 사례FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
자원
지원
지원 요청
수리를 요청하거나, 교정을 예약하거나, 기술 지원을 받을 수 있습니다. 유효한 서비스 계약이 필요할 수 있습니다.
NI 커뮤니티
질문하고 솔루션을 탐색하며 다른 NI 커뮤니티 멤버와의 토론에 참여하십시오.
기술지원 데이터베이스
NI 엔지니어가 작성한 자주 묻는 질문과 일반적인 오류에 대한 문제 해결 팁을 검색할 수 있습니다.
온라인 교육
수백 개의 자율 학습형 강의, 어플리케이션 중심의 학습 경로에 접근하여 제품 설정 길라잡이를 시작하세요.