Archived: LabVIEW RT and FieldPoint Controllers Compatibility

National Instruments does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

개요



This page shows supported versions of FieldPoint Controllers with LabVIEW Real-Time development systems. Reference this information to ensure you install the correct toolkit version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing LabVIEW palettes or functions.

Note that this article replaces KnowledgeBase 37F9DEXD: Software Installation Compatibility for FieldPoint Real-Time Controllers. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.

Contents

LabVIEW RT and FieldPoint Controllers Compatibility

Use this table to compare LabVIEW RT and FieldPoint Controllers Compatibility
Driver LabVIEW RT
2010 2011 2012 2013 2013 SP1 2014 SP1 2015 2015 SP1
FieldPoint 6.0.7 6.0.9 6.0.11 6.1.0 13.1+ 14.5+ 15.0+ 15.5
FP VI Manager 6.0.7 6.0.9 6.0.11 6.1.0        
NI-VISA 5.0.0 5.1.0 5.2.0 5.4.0 5.4.1 14.0 15.0 15.5
NI-Serial 3.6.0 3.8.0 3.8.1 4.0.0 4.1 15.0 15.0 15.0
NI-Watchdog 4.1.0 5.1.0 5.2.0 5.3.0        
NI-IRDA                
Data Socket 4.7.0 4.9.0 5.0.0 5.1.0        
PID Toolkit 10.0.0 11.0.0 12.0.0 13.0.0        
Modbus I/O Server 1.7.0 1.8.0 12.0.0 13.0.0        
Variable Client Support   1.7.0 1.8.0 12.0.0        


  Compatible Version


Legacy LabVIEW RT and FieldPoint Controllers Compatibility

Use this table to compare Legacy LabVIEW RT and FieldPoint Controllers Compatibility
Driver Legacy LabVIEW RT
6.1.1 6.1.3 7.0 7.1 8.0 8.2 8.5 8.5.1 8.6 8.6.1 2009
FieldPoint 4.1.6 4.1.6 4.1.7 5.0.2-6.0.4 5.1.1-6.0.1 5.0.1-6.0.6 6.0.0-6.0.8 6.0.1-6.0.8 6.0.3-6.0.10 6.0.4-6.0.10 6.0.5-6.0.12
FP VI Manager 1.0.28 1.0.28 2.0.1 3.0.0 4.0.0 4.1.0 6.0.0 6.0.0 6.0.3 6.0.4 6.0.5
NI-VISA     3.0.1 3.1 3.4.1 4.0 4.2 4.3 4.4 4.4 4.5.1
NI-Serial 2.0.2 2.0.2 2.5.2 2.5.3 2.5.6 3.1 3.3.0 3.3.1 3.3.2 3.3.3 3.3.4
NI-Watchdog 1.0.28 1.0.28 2.0 2.1.0 2.1.4 2.1.5 2.1.5 2.1.5 3.0 3.0.1 4.0.0
NI-IRDA     1.0.1 1.0.1 1.0.1 1.0.1 1.0.1 1.0.1      
Data Socket       4.2 4.3 4.4 4.5 4.5.4 4.5.5 4.5.5 4.7.0
PID Toolkit           8.2 8.5 8.5.1 8.6 8.6.1 9.0.0
Modbus I/O Server           1.2.2 1.4.0 1.4.1 1.5 1.5.1 1.6.0
Variable Client Support         1.0.0 1.2.2 1.4.0 1.4.1 1.5 1.5.1 1.6.0

 

  Compatible Version


If you have LabVIEW Real-Time 6.0 or 6.1 installed on the controller, NI recommends that you upgrade to version 6.1.3 or later.  Versions 6.1.3 and later are available on the FieldPoint 4.1 CD. For version 6.1.1 and earlier, contact NI.

LabVIEW Real-Time 7.1 or later requires MAX 3.1or later and must be installed using MAX.  Refer to the Using the LabVIEW Real-Time Software Wizard topic in the Remote Systems help.  To begin this Wizard, click the + next to the controller you wish to use under Remote Systems.  Then right-click Software and select Add/Remove Software.  This will initialize the LabVIEW Real-Time Software Wizard.