LabVIEW 2018 ELVIS III Toolkit Known Issues

Overview

This document contains known issues for the LabVIEW 2018 ELVIS III Toolkit. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered.

Contacting NI

You can contact us by phone, email, or the discussion forums. Visit the NI Website to contact us. If you are contacting NI in regards to a specific issue, be sure to reference the ID.

Known Issues

The following items are known issues in the LabVIEW 2018 ELVIS III Toolkit.

716129IV Analyzer Read does not produce accurate diode characteristic curves.
726398The Logic Configure Pulse Output VI introduces an output delay on the pattern generator under certain conditions.

 

Use this table to review known issues for the LabVIEW 2018 ELVIS III Toolkit.
IDKnown Issue
716129

Return
IV Analyzer Read does not produce accurate diode characteristic curves.
IV 2Wire Read.vi and IV 3Wire Read.vi do not produce valid characteristic curves for diodes.

Solution: Update to LabVIEW 2018 ELVIS III Toolkit SP2 or later.

Reported Version: 2018  Resolved Version: 2018 SP2  Added: 1/21/2019
726398

Return
The Logic Configure Pulse Output VI introduces an output delay on the pattern generator under certain conditions.
There is an output delay on the pattern generator when generating a constant logic high signal using Logic Configure Pulse Output.vi with the Low Time (s) input set to 0. The maximum delay of about 6.5 seconds is expected when the High Time (s) input is equal to 1.

Workaround: Set the High Time (s) input equal to a smaller number to reduce the pattern generator output delay.

Reported Version: 2018 SP2  Resolved Version: N/A  Added: 1/21/2019

 

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).