The InstrumentStudio 2018 SP2 manual contains information on navigating, configuring, and using InstrumentStudio. In addition, the manual contains reference material describing concepts that you may need ...

The following measurement types are available when creating oscilloscope channels with InstrumentStudio. Amplitude Mid Ref Volts Mean Negative Duty Cycle Peak-to-Peak Low Ref Volts Median Positive Pulse ...

Use relinking to re-establish a connection to a missing device, or replace the missing device with a different device of the same model in an existing panel.

You can use reference levels and gating to customize the measurements displayed in the measurement table.

You can select one of the following sample modes from the Instrument Settings window when configuring an oscilloscope acquisition with InstrumentStudio: Sample —The oscilloscope measures the signal at ...

Depending on the device, you can select different sampling methods from the Instrument Settings window of an oscilloscope: Real time —Gathers all the samples for a waveform in one acquisition with one ...

You can configure the setup of an oscilloscope using two options: Auto setup and Default setup.

The following devices can be used with InstrumentStudio:

Use the following settings to configure channels, triggers, and other parameters of the waveform generator.

You can determine the current state of an acquisition by looking at the acquisition status icon, located in the Horizontal & Acq. header of an oscilloscope panel. Triggered —The device met the trigger ...