Filtered Results

You can set the interpolation method of an oscilloscope acquisition to one of the following settings from the Instrument Settings window: No interpolation —The oscilloscope does not interpolate data. Auto ...

The InstrumentStudio 2018 SP2 manual contains information on navigating, configuring, and using InstrumentStudio. In addition, the manual contains reference material describing concepts that you may need ...

The following measurement types are available when creating oscilloscope channels with InstrumentStudio. Amplitude Mid Ref Volts Mean Negative Duty Cycle Peak-to-Peak Low Ref Volts Median Positive Pulse ...

A waveform generator channel can be in one of the following states: Stopped —Waveform generation is stopped on this channel. Running —Waveform generation is running on this channel. Waiting for trigger ...

You can use InstrumentStudio to host applications written in LabVIEW or C#. These applications run alongside the InstrumentStudio panels used to configure PXI instruments. Hosted applications have a runtime ...

Exporting configurations saves time when automating test sequences in TestStand. Once you configure your hardware in InstrumentStudio, you can export your configuration for use in TestStand sequences. ...

In most practical applications, the digital multimeter (DMM) is connected to the device under test with switches, fixtures, or cables. These switches and fixtures can introduce undesired errors into the ...

You can determine the current output status of non-idle channels with the output status icon, located at the top of the Channels section of an SMU/Power Supply panel.

The InstrumentStudio 2020 manual contains information on navigating, configuring, and using InstrumentStudio. In addition, the manual contains reference material describing concepts that you may need when ...

A waveform generator channel can be in one of the following states: Stopped —Waveform generation is stopped on this channel. Running —Waveform generation is running on this channel. Waiting for trigger ...

Depending on the device, you can select different sampling methods from the Instrument Settings window of an oscilloscope: Real time —Gathers all the samples for a waveform in one acquisition with one ...

A power spectral density is the measure of a signal's power content versus frequency. You can view the power spectral density of a signal while analysing data in the frequency domain; this is helpful for ...

Use relinking to re-establish a connection to a missing device, or replace the missing device with a different device of the same model in an existing panel.

When you insert an IO Configuration file into a TestStand sequence, TestStand creates a copy of the configuration file in the step you specify. When you run the sequence, the step creates sessions for ...

Using InstrumentStudio, you can capture data from an entire layout or a single panel. You can also take a screenshot without capturing data.

Depending on the device, you can select different sampling methods from the Instrument Settings window of an oscilloscope: Real time —Gathers all the samples for a waveform in one acquisition with one ...

You can change the channel operating mode of an SMU/Power Supply channel to Voltage Sequence or Current Sequence mode to enable power sequencing. Power sequencing allows you to output the desired power-up ...

Before you can take measurements and monitor devices in InstrumentStudio, you must create a layout. Create a layout from the Home screen, from the document toolbar, or from any instrument header menu.

436 결과 중 1-20 표시
1 22페이지 중