量測 strain 時 NI 9237 相對於 NI 9219 的優勢。
硬體: CompactDAQ>>Analog Input Modules>>NI 9237, CompactDAQ>>Analog Input Modules>>NI 9219
問題: 我預定使用 compactDAQ 或 compactRIO 量測 Strain Gauge 的資料。NI 9237 橋接器模組與 NI 9219 通用類比輸入模組都是可以滿足我的需求的選擇。我想了解 NI 9237 優於 NI 9219 的地方。
解答: 幾個 9237 明顯優於 9219 的特點如下:
- 9237 的取樣頻率可以到 50KS/sec 而 9219 只有 100S/sec。
- 9237 的激發電壓是可調整的〈最高可達 10V〉;而 9219 則是固定值〈視電橋種類與負載組抗而定,電壓在 2 到 2.7 V 之間〉。
- 有些 sensor 會有 Sense+ 與 Sense- 的輸出 pin 腳。如果這些 sensor 距離 9237 有一定距離,那麼這兩個 sense 輸出有助於減少誤差。9237 有提供這種 remote sensing 減少誤差的輸入,但 9219 沒有,也因此增加了誤差。
總而言之,如果您只須基本的 strain 量測,無須高取樣率,同時您的 sensor 也沒有 Sense + 與 Sense- 輸出,那麼就推薦您除了 strain 還可以量測其他信號的 9219 通用類比輸入模組。反之則推薦您使用 9237。
相關連結: Products and Services: NI 9237
Products and Services: NI 9219
附加檔案:
報告日期: 08/21/2007
最後更新: 09/06/2007
文件偏號: 4CKH1L4G
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.