模式匹配模板大小限制
主要软件: IMAQ Vision Builder
主要软件版本: 5.0
主要软件修正版本: N/A
次要软件: N/A
问题: 为什么当我从我的图像里选择一个较大的模式匹配模板时,在Vision Builder里出现"not a valid template"对话框,且在Vision 5.0或6.0里出现"system error"对话框
解答: 这些错误的发生是由于在IMAQ Vision里模式匹配模板大小有限制。这个限制在Vision 5.0、6.0和7.0里都存在。在Vision 7.0中软件错误显示为:"The template is too large"。
模式匹配模板最大为160,000像素,和模板的尺寸无关。
相关链接:
附件:
报告日期: 01/26/2001
最近更新: 05/04/2007
文档编号: 25PF1IQ1
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.