如何在运行Windows XP/2000操作系统的计算机和设备间建立局域网络连接?



硬件: Compact FieldPoint>>Controllers, GPIB>>External Controllers/Convertors>>GPIB-ENET, GPIB>>External Controllers/Convertors>>GPIB-ENET/100, CompactRIO>>Controllers

问题: 我希望能够使用集线器或者交叉线直接连接电脑与现场节点/GPIB Enet-100/实时目标设备。请问我需要在电脑上做那些配置来达到这个目的?

解答: 首先,按照以下步骤在Windows XP/2000系统中设置计算机:
  1. 选择控制面板»网络连接.
  2. 右健单击局域网连接,选择属性.
  3. 滚动鼠标滚轮,选择Internet协议(TCP/IP).
  4. 单击属性,打开Internet协议(TCP/IP)属性对话框.
  5. 单击"使用下列IP地址:"来设置一个静态IP,设置如下:
下一步是设置目标设备的IP地址。不同的目标设备到达设置IP地址设置界面的方法是不同的,所以如果需要这方面的帮助,请查阅所用设备的用户手册.

设置范例

  计算机 目标设备
IP地址 192.168.1.1 192.168.1.2
子网掩码 255.255.255.0 255.255.255.0
默认网关 192.168.1.1 192.168.1.1
DNS服务器地址 空白 空白



相关链接: TCP/IP basics - Non NI Site
KnowledgeBase 1KMG78PH: How Can I Determine the IP Address of My Computer?
KnowledgeBase 2FF6N4KN: Choosing an IP Address for Your Real-Time Engine
KnowledgeBase 2RHCS8M5: How Do I Change the IP Address of a RT Series Controller (Fieldpoint, cRIO, etc) that is not on the Local Subnet?
KnowledgeBase 1XGF6R4U: I Cannot Connect to My LabVIEW Real-Time Target on the Network
Developer Zone Tutorial: Troubleshooting Communication Problems with the FieldPoint Ethernet Network Modules

附件:





报告日期: 12/20/2005
最近更新: 03/02/2008
文档编号: 3SJD8501