在DAQ助手中的I/O类型或编辑错误
主要软件:
主要软件版本: 7.0
主要软件修正版本: N/A
次要软件: N/A
问题: 当我使用DAQ助手产生如图1所示代码时,收到了“Not Implemented for this I/O Control Type”的错误提示。当我使用express VI 来执行我的代码时却没有任何错误。
Figure 1: Generate DAQmx Code from DAQ Assistant
当我在Measurement and Automation Explorer 中如图2修改我的任务时收到了 "Interactive Editing has been disabled for this Task"的错误提示。我的代码仍然能够运行我可以在DAQ助手ExpressVI中修改参数。
Figure 2: Modify Task in Measurement and Automation Explorer
解答: 以上这些错误都是由于MAX数据库崩溃引起的。可以通过如下链接操作方法来移除这一错误。
相关链接:
附件:
报告日期: 09/02/2009
最近更新: 05/30/2011
文档编号: 511C089G
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.