PCIe-6509
開始価格 $645.00
PCI Express, 96-Channel, 5 V, TTL/CMOS, 24 mA Digital I/O Device
概要
The PCIe-6509 can directly drive external digital devices such as solid-state relays (SSRs). You can configure each port for input or output, and no external power supply is required for outputs.
Using programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators. If a computer or application fault occurs, the PCIe-6509 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. Programmable input filters eliminate glitches/spikes and provide debouncing for digital switches/relays through a software-selectable digital filter.
付属品
- Device
- Safety, Environmental, & Regulatory documentation
PCIe-6509 詳細
製品番号 (1) 価格 | 779976-01 |
|---|---|
| NI Lead Time | 10-11 weeks |
| Bus Connector | PCI Express |
| Number of Bidirectional Digital Channels | 96 |
| Number of Digital Input Only Channels | 0 |
| Number of Digital Output Only Channels | 0 |
| Digital Input Voltage Range | 0 V to 5 V |
| Output Voltage Range | 0 V to 5 V |
| Maximum Clock Rate | — |
| Single-Ended Digital I/O Channel Current Drive | 24 mA |
| Reconfigurable | — |
| Maximum Sample Rate | — |
| Number of Analog Input Channels | — |
| Maximum Digital Update Rate | — |
| Maximum Analog Update Rate | — |
| Number of Analog Output Channels | — |
| Operating Temperature Range | 0 °C to 55 °C |
| Bus Connection | PCI Express |
| Current Flow Direction | Sinking Input#Sourcing Input#Sinking Output#Sourcing Output |
| Digital I/O Isolation | — |
| Digital I/O Logic Levels | 5 V TTL |
| Front Connection Type | SCSI Type(1) |
| Number of Counters/Timers | — |
| Number of External Clock Inputs | — |
| Relay Type | — |
| Signaling Type | Single-Ended |
| Supports Peer To Peer Streaming | — |
| Supported Hardware Platform | Computer-Based Device |
| Digital I/O Termination | — |
| Duplex | — |
| Dynamic RAM (DRAM) | — |
| Maximum Acquisition Rate | — |
| Maximum Generation Rate | — |
| Maximum Active Load | — |
| Maximum Data Rate | — |
| Module Width | — |
| Onboard Memory | — |
| Supports Hardware Compare | — |
| Supports PMU | — |
| 製品説明 | NI PCIe-6509 96 Ch, 5V DIO and NI-DAQmx Driver Software |
PCIe-6509 アクセサリとソフトウェア
- 製品 (製品番号)説明推奨使用例FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
リソース
サポート
サポートのお申し込み
修理依頼、校正の予約、技術サポートをご利用いただけます。ご利用には有効なサービス契約が必要となる場合があります。
NIコミュニティ
質問やソリューションの調査を行ったり、NIコミュニティの他のメンバーとのディスカッションへ参加したりすることができます。
技術サポートデータベース
NIのエンジニアが作成した、よくある質問と回答 (FAQ)、および一般的なエラーに対するトラブルシューティングのヒントを参照いただけます。
オンライントレーニング
多数の自習形式のトレーニングやアプリケーションごとの学習プランにアクセスできるほか、各製品のセットアップに役立つチュートリアルが用意されています。