Filtered Results

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/​manuals for each device. Note: Your ...

This guide describes how to select a cable or accessory that is compatible with your CompactRIO Controller or CompactRIO Expansion Chassis. NI provides a wide variety of CompactRIO Controllers and Expansion ...

Use this guide to select the correct mounting accessory for your CompactRIO Controller. Whether you are creating a new configuration, replacing or expanding your current CompactRIO System, or verifying ...

This document explains several configuration constraints to help you find the right system that is compatible with MXI-​Express hardware and software when using NI MXI-​Express RIO expansion chassis. You ...

This page documents all the applicable standards and certifications for the NI-9151 and provides downloadable certifications.

The following specifications are typical for the range -40 °C to 70 °C unless otherwise noted. These specifications are for the NI 9151 expansion chassis only. For I/​O module specifications, refer to the ...

NI-9157: 14-​Slot, Virtex-5 LX85 FPGA, MXI-​Express CompactRIO Chassis NI-9159: 14-​Slot, Virtex-5 LX110 FPGA, MXI-​Express CompactRIO Chassis

Operating temperature 0 °C to 55 °C Storage temperature -40 °C to 85 °C Notice Failure to follow the mounting instructions in the user manual can cause temperature derating. Ingress protection IP40 Operating ...

Weight NI-9157 2,231 g (78.7 oz) NI-9159 2,231 g (78.7 oz) Dimensions Visit ni.com/​dimensions and search by model number. Screw-​terminal wiring Gauge 0.2 mm 2 to 2.1 mm 2 (24 AWG to 14 AWG) copper conductor ...

NI-9157 Voltage requirement 9 V to 30 V Recommended power supply 55 W, 30 V DC maximum Chassis power consumption/​dissipation With no I/​O modules 14.4 W maximum With 14 I/​O modules 30.7 W maximum NI-9159 ...

The NI-9157/9159 have been evaluated as Ex ec IIC T4 Gc equipment and are CCC certified. Each product is suitable for use within ambient temperatures of 0 °C ≤ Ta ≤ 55 °C in either nonhazardous locations ...

Operate the product only as described in this document. Caution This icon denotes a caution, which advises you to consult documentation where this symbol is marked. Caution Do not operate this product ...

Connect only voltages that are below these limits. V terminal to C terminal 30 V DC maximum, Measurement Category I Caution Do not connect the product to signals or use for measurements within Measurement ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI 78xx Device Setup API Overview Important Information Tags: API Overview NI-9151 USB-7856 USB-7855 USB-7846 USB-7845 PXIe-7822 PXIe-7821 ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI 78xx Device Setup API Overview Using Help Tags: API Overview NI-9151 USB-7856 USB-7855 USB-7846 USB-7845 PXIe-7822 PXIe-7821 PXIe-7820 ...

Skip to Content Bookmarks Watch List Search Preferences Log in NI 78xx Device Setup API Overview RIO Device Setup Help Tags: API Overview NI-9151 USB-7856 USB-7855 USB-7846 USB-7845 PXIe-7822 PXIe-7821 ...

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or ...

To navigate this help file, use the Contents, Index, and Search tabs to the left of this window or use the following toolbar buttons located above the tabs:

For patents covering the National Instruments products/​technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent ...

Most NI 781xR/​783xR/​784xR/​785xR and cRIO-910x manuals are available as PDFs. You must have Adobe Reader with Search and Accessibility 5.0.5 or later installed to view the PDFs. Refer to the Adobe Systems ...

Use the RIO Device Setup dialog box to download a bitfile to the flash memory on an FPGA device. LabVIEW creates a bitfile when you compile an FPGA VI. You also can use this dialog box to configure when ...

​検索​結果​36​件​中​1-30​件​まで​を​表示
1 /​2​ページ