Filtered Results

Opens a session for the supported hardware you specify, sets initial values of certain properties for the session, and returns a reference that identifies the instrument in all subsequent NI-​RFSG nodes. ...

Stops signal generation. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5611 PXIe-5644/5645/5646 PXI/​PXIe-5650/5651/5652, PXIe-5653/5654/5654 ...

Programs the device with the correct settings. Calling this node moves the NI-​RFSG device from the Configuration state to the Committed state. After this node executes, a change to any property reverts ...

Creates a new configuration list step in the configuration list specified by the Active Configuration List property. When you create a configuration list step, a new instance of each property specified ...

Creates and initializes an NI-​RFSG external calibration session. Not supported Not supported in VIs that run in a web application This node supports the following hardware: PXIe-5611 PXI/​PXIe-5650/5651/5652, ...

Initiates signal generation, causing the NI-​RFSG device to leave the Configuration state or Committed state and enter the Generation state. If settings have not been committed to the device before you ...

Self-​calibrates all configurations within the specified frequency and peak power level limits. NI recommends that no external signals are present on the RF In or IQ In ports during the calibration. Not ...

Forces a trigger to occur. The specified trigger generates regardless of whether the trigger has been configured as a software trigger. Not supported Not supported in VIs that run in a web application ...

Allocates onboard memory space for the arbitrary waveform. Use this node to specify the total size of a waveform before writing the data. Use this node only if you are calling Write Arb Waveform multiple ...

​検索​結果​91​件​中​1-10​件​まで​を​表示
1 /​10​ページ