Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

This document explains how to connect to the NI-9216 . In this document, the NI-9216 with spring terminal and the NI-9216 with DSUB are referred to inclusively as the NI-9216 . Note Before you begin, read ...

NC EX0+ RTD0+ RTD0- COM EX1+ RTD1+ RTD1- COM EX2+ RTD2+ RTD2- COM EX3+ RTD3+ RTD3- COM NC NC EX4+ RTD4+ RTD4- COM EX5+ RTD5+ RTD5- COM EX6+ RTD6+ RTD6- COM EX7+ RTD7+ RTD7- COM NC 1 2 3 4

Each channel has an open thermocouple detection (OTD) circuit, which consists of a current source between the TC+ and TC- terminals.

What to Use NI-9213 spring-terminal connector 0.08 mm 2 to 1.0 mm 2 ( 28 AWG to 18 AWG ) copper conductor wire with 7 mm ( 0.28 in. ) of insulation stripped from the end Flathead screwdriver with a

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI-9213 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...

The NI 9213 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 07 ATEX 0626664X and is IECEx UL 14.0089X certified. Each NI 9213 is marked II 3G and is suitable for use in Zone 2 hazardous

If hazardous voltages are connected to the product, take the following precautions. A hazardous voltage is a voltage greater than: 30 V RMS , 42.4 V peak , or 60 V DC in DRY LOCATIONS 16 V RMS , 22.6

Visualizzati 81-90 di 28304 risultati
9 di 2831 pagine