Filtered Results

Device Operating ModesYou can use one of the following modes for acquiring measurements using an SMU or VPS device in InstrumentStudio: Chart, Waveform, and Sweep. Operating Mode Sourcing Behavior Large ...

Configure oscilloscope measurements from the Settings tab of the Measurements window, accessible by selecting Add/Remove in the measurement table of an oscilloscope. Gating Screen—Displays only the data ...

Depending on the device, you can select different sampling methods from the Instrument Settings window of an oscilloscope: Real time—Gathers all the samples for a waveform in one acquisition with one trigger ...

Waveform Channel Settings Output Impedance—Sets the output impedance value to either 50 Ω or 75 Ω. Load Impedance—Sets the load impedance value to one of the following settings: Match output—Matches the ...

You can select one of the following sample modes from the Instrument Settings window when configuring an oscilloscope acquisition with InstrumentStudio: Sample—The oscilloscope measures the signal at a ...

Default setup—Returns the device to the default configuration. Auto setup—Enables all channels and automatically configures device settings. Settings Changed by Auto Setup Setting an oscilloscope to Auto ...

NI-DCPower Devices PXI Express PXI PXIe-4112 PXIe-4113 PXIe-4135 PXIe-4136 PXIe-4137 PXIe-4138 PXIe-4139 PXIe-4139(40W) PXIe-4140 PXIe-4141 PXIe-4142 PXIe-4143 PXIe-4144 PXIe-4145 PXIe-4147 PXIe-4154 PXIe-4162 ...

You can determine the current state of an acquisition by looking at the acquisition status icon, located in the Horizontal & Acq. header of an oscilloscope panel. Triggered—The device met the trigger condition ...

Considerations when configuring sessions with SMU devicesUsing independent channels allows you to configure multiple channels of the same instrument, or multiple instruments, within the same session independently ...

Exporting an InstrumentStudio Configuration From the top toolbar or the instrument header menu, select the Export to TestStand button ().You must have TestStand 2019 or later installed for the Export to ...

Visualizzati 21-30 di 38 risultati
3 di 4 pagine