Ensure that the USB connections between the cRIO-9064 and the host computer and the Ethernet connections between the host computer and the router are secure. Configure the IP and other network settings ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

Complete the following steps to install a C Series module. 2 2 3 1 Verify that power is not connected to the I/O connector(s) on the C Series module. If the system is in a nonhazardous location, the cRIO-9064 ...

Complete the following steps to install software on the cRIO-9064 . In MAX, expand your system under Remote Systems. Right-click Software . Select Add/Remove Software to launch the LabVIEW Real-Time Software ...

Before using the cRIO-9064 , you must install the following application software and device drivers on the host computer in this order: LabVIEW 2014 SP1 or later LabVIEW Real-Time Module 2014 SP1 or later ...

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

When you power on the cRIO-9064 for the first time, the device boots into safe mode. The POWER LED illuminates, the STATUS LED illuminates briefly, and then the STATUS LED blinks twice every few seconds. ...

Ensure that the environment in which you are using the cRIO-9064 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -20 °C to 55 °C Operating humidity (IEC 60068-2-78) ...

Verify that power is not connected to the I/O connector(s) on the C Series module before you remove a module from the cRIO-9064 . If the system is in a nonhazardous location, the cRIO-9064 can be powered ...

Visualizzati 111-120 di 277873 risultati
12 di 27788 pagine