NI System Driver Set January 2018

Contents

The NI System Driver Set January 2018 provides the latest version of NI drivers as of the release on February 23rd, 2018. This driver set adds support for the following new hardware: 

PXIe-1095

PXIe-7902R -Only supported on LabVIEW 2017

cRIO-904x - Only supported on LabVIEW 2017

  • cRIO-9040
  • cRIO-9041
  • cRIO-9042
  • cRIO-9043
  • cRIO-9044
  • cRIO-9045
  • cRIO-9046
  • cRIO-9047
  • cRIO-9048
  • cRIO-9049

PXIe-8394

NI-9202

NI-9202 (DSUB)

NI-9350 - Only cRIO support

RMC-8357

 

For LabVIEW version compatibility please see the system driver set main page.

Contents

The following drivers are included in the January 2018 System Driver Set:

Data Acquisition

    • NI-DAQmx 17.6.0
    • Traditional NI-DAQ 7.4.4

Instrument Control

    • NI-488.2 17.0.0
    • NI-VISA 17.5.0
    • NI-Serial 17.5
    • IVI Compliance Package 17.0
    • PXI Platform Services 17.5.1
    • NI-PXImc 16.0
    • NI-VXI 16.0.0

Modular Instruments

    • NI-Switch 17.5
    • NI-DMM 17.5
    • NI-Scope 17.5
    • NI-RFSA 17.1.1
    • NI-FGEN 17.1.1
    • NI-DCPower 17.5
    • NI-RFSG 17.1.0
    • NI-HSDIO 17.5
    • NI-5690 17.0
    • NI-OSI 16.0
    • NI-VNA 17.0
    • NI-HWS 17.5
    • NI-Digital Pattern Driver 17.1

Timing and Synchronization

    • NI-Sync 17.0.0
    • NI-TimeSync 17.1
    • NI-1588 Configuration 17.0

Reconfigurable IO

    • CompactRIO 17.6
    • NI-RIO 17.0.1
    • NI-FlexRIO 17.0
    • FlexRIO Adapter Module Support 17.0.0

Motion

    • NI-Motion 17.0

Vision

    • NI-IMAQ 17.5
    • NI-IMAQdx 17.5

Distributed I/O

    • NI-FieldPoint 15.5
    • NI-WSN 15.0

Real-Time and Embedded

    • NI-488.2 17.0.0
    • NI-Serial 17.5

Communication Buses and Protocols

    • NI-XNET 17.5
    • NI-CAN 17.0
    • NI-IndCom for CANopen 17.0
    • NI-IndCom for DeviceNet 17.0
    • NI-IndCom for EtherCat 17.0

Configuration and Utilities

    • NI I/O Trace 17.0
    • NI Measurement & Automation Explorer 17.5.0
    • NI System Configuration 17.5.0

 

Download

To download the Jan 2018 driver set, run the downloader attached to this document. Note that this download is larger than 4 GB. Please follow the instructions in How Can I Unzip National Instruments Software Larger than 4 Gigabytes? for downloading this file.