NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
Click here for the latest release of NI-DAQmx.
The following table lists the latest DAQ driver that is supported for various NI Signal Conditioning Accessories. The table also shows which driver can be used with Windows, Linux, Real-Time or Mac OS X.
| B | Device works with NI-DAQmx Base |
|---|---|
| T | Device works with Traditional NI-DAQ (Legacy) |
| mx | Device works with NI-DAQmx |
| NS | Device works with NI-Switch |
| X | Not Supported |
| * | AI only |
| Device | Windows | LabVIEW RT | Linux | Mac | ||||
|---|---|---|---|---|---|---|---|---|
| SC Accessories | Seven | Vista | XP | 2000 | NT2 | Pharlap4 | Linux3 | OS X |
| SC-2040 | X | X | 6.9.3T | 6.9.3T | 6.9.3T | 6.9.3T | X | X |
| SC-2042-RTD | X | X | 6.9.3T | 6.9.3T | 6.9.3T | 6.9.3T | X | X |
| SC-2043-SG | X | X | 6.9.3T | 6.9.3T | 6.9.3T | 6.9.3T | X | X |
| SC-2345 | 9.3mx | 9.3mx | 9.3mx 7.4.4T | 9.1.1mx 7.4.4T | 7.5mx 7.4T | 9.3mx 7.4.4T | 8.0.1mx | X |
| SC-2350 | 9.3mx | 9.3mx | 9.3mx | 9.1.1mx | 7.5mx | 9.3mx | 8.0.1mx | X |
| SCC-68 | 9.3mx | 9.3mx | 9.3mx | 9.1.1mx | X | 9.3mx | X | X |
| SCC Series Modules | 9.3mx | 9.3mx | 9.3mx 7.4.4T | 9.1.1mx 7.4.4T | 7.5mx 7.4T | 9.3mx 7.4.4T | 8.0.1mx | X |
| AMUX-64T | X | X | 6.9.3T | 6.9.3T | 6.9.3T | 6.9.3T | X | X |
2. NI-DAQ 6.9.3 or Earlier requires NT Service Pack 4 or greater. NI-DAQ 7.x (Traditional and mx) requires NT Service Pack 6 or greater.
3. For information on supported Linux distributions, visit /linux/support.htm#1 or see the driver readme file.
4. The host system must also support the version of NI-DAQ listed. NI-DAQmx for LabVIEW RT is only supported on Pharlap RT Systems with LabVIEW RT installed.