Archived: LabVIEW 2009 Embedded Module for ARM Microcontrollers Known Issues
Updated Mar 17, 2020
NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
This document has been archived and is no longer updated by National Instruments.
This document contains the LabVIEW 2009 Embedded Module for ARM Microcontrollers known issues that were discovered before and since the release of LabVIEW 2009. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered.
National Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. However, NI has become aware of a number of issues of potential significance regarding Microsoft Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the Info Code windows7.
Feel free to contact NI regarding this document or issues in the document. If you are contacting NI in regards to a specific issue, be sure to reference the ID number given in the document to the NI representative. The ID number contains the current issue ID number as well as the legacy ID number (use the current ID number when contacting National Instruments). You can contact us through any of the normal support channels including phone, email, or the discussion forums. Visit the NI Website to contact us. Also consider contacting us if you find a workaround for an issue that is not listed in the document so that we can add the workaround to the document.
In the Project Build Specifications, if "Use stack variables" and "Disable parallel execution" are not enabled together, LabVIEW ignores both options
The "Disable parallel execution" option is necessary to enable the "Use stack variables" optimization. The Build Specification does not explicitly mention this dependency. If the "Disable parallel execution" option is unchecked, the "Use stack variables" optimization is ignored.
Workaround: Always use "Disable parallel execution" with the "Use stack variables" optimization.
Using timestamp functions with Serial or TCP debugging causes the build to break
While using debugging over TCP Port or Serial Port, the Application will fail to build if one or more VIs in the project contains timestamp functions. This issue can be seen with the timestamp datatype and all associated functions.
User specified compiler Optimization level is ignored if JTAG debugging is enabled
The user specified value of compiler optimization level (-Ox), set in the Advanced Compilation Options in the Build Specification is ignored if JTAG debugging is enabled. A default of -O0 is used in this case.
I2C VIs do not support interface selection or multiple slave addresses
The ARM I2C VIs do not give you the ability to use all available I2C interfaces (ports) on your Microcontroller. They also do not have the ability to address multiple slaves.
Installation of the LabVIEW ARM Module fails if %TEMP% contains Japanese characters
The installation of the LabVIEW 2009 Embedded Module for ARM Microcontrollers will fail on the Japanese language version of Windows XP if the %TEMP% path contains Japanese characters.
Workaround: Change the %TEMP% environment variable to all english characters.
You probably noticed we have a new look, but our focus remains on you. We've expanded our offerings to better serve you so that you can take on the complex challenges facing humanity today, tomorrow, and for the next 100 years. It's time. Let's Engineer Ambitiously.