PXIe-6739
À partir de $6,634.00
16-Bit, 64-Channel, 1 MS/s PXI Analog Output Module
Présentation
The PXIe-6739 is a high-density analog output module. The device is ideal for applications such as stimulus-response tests and open-loop simulations at high densities. You can achieve the maximum sample rate if using up to 16 channels, where each channel is on a separate bank.
The PXIe-6739 also includes 20 digital I/O lines, four counter/timers, digital triggering, and advanced timing to meet a wide range of application requirements. Its digital triggering and PXI Express synchronization capabilities allow it to be coupled with additional data acquisition, motion, and vision products to create highly custom measurement solutions to test innovative designs.
Articles inclus
- Module
- Safety, Environmental, and Regulatory documentation
PXIe-6739 Détails du
Numéros de référence (1) Prix | 783801-01 |
|---|---|
| NI Lead Time | 6-7 weeks |
| Number of Analog Output Channels | 64 |
| Analog Output Resolution | 16 bits |
| Maximum Analog Update Rate | 1 MS/s |
| Analog Output Voltage Range | -10 V to 10 V |
| Bus Connector | PXI Express |
| Output Current Range | — |
| Bus Connection | PXI Express |
| Maximum Number of Single-Ended Analog Input Channels | — |
| Maximum Number of Differential Analog Input Channels | 0 |
| Analog Input Resolution | — |
| Reconfigurable | — |
| Maximum Sample Rate | — |
| Number of Analog Input Channels | — |
| Analog Input Voltage Range | — |
| Analog Input Isolation | — |
| Filtering | — |
| Number of Current Output Channels | 0 |
| Number of Voltage Output Channels | — |
| Analog Output Isolation | None |
| Number of Bidirectional Digital Channels | 20 |
| Digital I/O Logic Levels | 5 V TTL |
| Simultaneous Sampling | — |
| Analog Input Absolute Accuracy | — |
| Analog Input Maximum Absolute Accuracy | — |
| Operating Temperature Range | 0 °C to 55 °C |
| Number of Counters/Timers | 4 |
| Front Connection Type | VHDCI(2) |
| Maximum Current Drive | 10 mA |
| Description du produit | PXIe-6739, 16-bit, 64 Analog Outputs |
PXIe-6739 Accessoires et logiciels
- Modèle (Numéro de référence)DescriptionImageNuméros de référence compatiblesTBX-68 (777141-01)TBX-68, 68-PIN Male SCSI Connector Block783801-01SCB-68A (782536-01)SCB-68A Noise Rejecting, Shielded I/O Connector Block783801-01CB-68LPR (777145-02)CB-68LPR I/O Connector Block783801-01CB-68LP (777145-01)CB-68LP Low-Cost, Unshielded I/O Connector Block783801-01
- Produit (Numéro de référence)DescriptionCas d’utilisation recommandésFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Ressources
Support
Demande de support technique
Vous pouvez demander une réparation, planifier l’étalonnage ou obtenir une assistance technique. Vous devez avoir souscrit un contrat de service.
Communauté NI
Posez vos questions, explorez les solutions et participez aux discussions avec d’autres membres de la Communauté NI.
Base de connaissances
Trouvez des réponses aux questions fréquentes et des astuces de dépannage pour les erreurs courantes, rédigées par les ingénieurs NI.
Formations en ligne
Accédez à des centaines de leçons à suivre à votre propre rythme, des parcours de formation axés sur les applications et commencez avec les tutoriels de configuration des produits.