PXI-4220

Numéro(s) de référence:
778745-4220

333 kS/s, 16-Bit, 2-Channel PXI Strain/Bridge Input Module

Présentation

The NI PXI-4220 is a full-featured input module for quarter-, half-, and full-bridge sensors, such as strain gages, load cells, and pressure sensors. Bridge configuration, excitation, amplification, and filtering are fully programmable per channel. In addition, the PXI-4220 provides simultaneous-sample-and-hold capability to eliminate phase delay between channels. Each input channel of the module includes a 9-pin D-SUB connector for easy connection to bridge sensors and programmable shunt and null calibration circuitry to improve measurement accuracy by eliminating gain and offset errors.

PXI-4220 Détails du

Configurer un système dans notre PXI Guide interactif de sélection
Contacter le service commercial
Numéros de référence (1) Prix
778745-4220
Contact
NI Lead Time
—
Analog Input Voltage Range
-10 mV to 10 mV
-18 mV to 18 mV
-50 mV to 50 mV
-100 mV to 100 mV
-180 mV to 180 mV
-500 mV to 500 mV
-1 V to 1 V
-1.8 V to 1.8 V
-5 V to 5 V
-10 V to 10 V
Maximum Sample Rate
333 kS/s
Maximum Number of Differential Analog Input Channels
2
Bridge Configurations
Full Bridge#Half Bridge#Quarter Bridge
Bridge Resistance
350 Ohm#120 Ohm
Supported Hardware Platform
PXI
Bus Connection
PXI
Current Sensitivity
—
DC Current Range
—
Max DC Sink Power
—
Max DC Source Power
—
Number of SMU Channels
—
Pulsed Current Range
—
SourceAdapt
—
Voltage Range
—
Description du produit
NI PXI-4220 2 ch Bridge Input

PXI-4220 Accessoires et logiciels

  • Produit (Numéro de référence)
    Description
    Cas d’utilisation recommandés
    FlexLogger Professional (785748-3501)
    FlexLogger Professional, Subscription License, Download

    Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.

    Key Features

    • Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
    • Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
    • Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
    • Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
    • Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
    • Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
    • CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
    Afficher les détails du produit
    LabVIEW+ Suite (788509-35)
    NI LabVIEW+ Suite, Subscription License, Download

    Recommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.

    The LabVIEW+ Suite includes the following products:

    • NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
    • NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
    • NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
    • NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
    • NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
    Afficher les détails du produit

Ressources

PXI-4220 Certification(s) des produits

Support

Demande de support technique
Vous pouvez demander une réparation, planifier l’étalonnage ou obtenir une assistance technique. Vous devez avoir souscrit un contrat de service.
Communauté NI
Posez vos questions, explorez les solutions et participez aux discussions avec d’autres membres de la Communauté NI.
Base de connaissances
Trouvez des réponses aux questions fréquentes et des astuces de dépannage pour les erreurs courantes, rédigées par les ingénieurs NI.
Formations en ligne
Accédez à des centaines de leçons à suivre à votre propre rythme, des parcours de formation axés sur les applications et commencez avec les tutoriels de configuration des produits.
PXI-4220 - NI