PCI-DIO-96
182920-01
777387-01
96-Channel, 5 V, TTL/CMOS, 2.5 mA Digital I/O Device
Présentation
The PCI-DIO-96 is a 24-bit parallel digital I/O interface. The device is ideal for a wide variety of applications including automotive design, industrial factory automation, and machine control. The PCI-DIO-96 device can interface to peripherals or other computers. The device uses four, 24-bit programmable peripheral interfaces (PPIs) that can each be divided into three, 8-bit ports. The PCI-DIO-96 can operate in either a unidirectional or bidirectional mode and handshake with peripheral equipment. You can connect the device to limit and proximity switches, level gauges, pressure switches, gas detectors, pumps, motors, digital data buses, and more.
PCI-DIO-96 Détails du
Numéros de référence (2) Prix | 182920-01 | 777387-01 |
|---|---|---|
| NI Lead Time | 16-17 weeks | 16-17 weeks |
| Bus Connector | PCI | PCI |
| Number of Bidirectional Digital Channels | 96 | 96 |
| Number of Digital Input Only Channels | 0 | 0 |
| Number of Digital Output Only Channels | — | — |
| Digital Input Voltage Range | — | — |
| Output Voltage Range | — | — |
| Maximum Clock Rate | — | — |
| Single-Ended Digital I/O Channel Current Drive | 24 mA | 24 mA |
| Reconfigurable | — | — |
| Maximum Sample Rate | — | — |
| Number of Analog Input Channels | — | — |
| Maximum Digital Update Rate | — | — |
| Maximum Analog Update Rate | — | — |
| Number of Analog Output Channels | — | — |
| Operating Temperature Range | — | — |
| Bus Connection | PCI | PCI |
| Current Flow Direction | — | — |
| Digital I/O Isolation | — | — |
| Digital I/O Logic Levels | — | — |
| Front Connection Type | — | — |
| Number of Counters/Timers | — | — |
| Number of External Clock Inputs | — | — |
| Relay Type | — | — |
| Signaling Type | Single-Ended | Single-Ended |
| Supports Peer To Peer Streaming | — | — |
| Supported Hardware Platform | Computer-Based Device | Computer-Based Device |
| Digital I/O Termination | — | — |
| Duplex | — | — |
| Dynamic RAM (DRAM) | — | — |
| Maximum Acquisition Rate | — | — |
| Maximum Generation Rate | — | — |
| Maximum Active Load | — | — |
| Maximum Data Rate | — | — |
| Module Width | — | — |
| Onboard Memory | — | — |
| Supports Hardware Compare | — | — |
| Supports PMU | — | — |
| Description du produit | PCI-DIO-96 BOARD ONLY | PCI-DIO-96 Digital I/O Device and NI-DAQ forWindows 2000/NT/9x, Mac |
PCI-DIO-96 Accessoires et logiciels
- Produit (Numéro de référence)DescriptionCas d’utilisation recommandésFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Ressources
Support
Demande de support technique
Vous pouvez demander une réparation, planifier l’étalonnage ou obtenir une assistance technique. Vous devez avoir souscrit un contrat de service.
Communauté NI
Posez vos questions, explorez les solutions et participez aux discussions avec d’autres membres de la Communauté NI.
Base de connaissances
Trouvez des réponses aux questions fréquentes et des astuces de dépannage pour les erreurs courantes, rédigées par les ingénieurs NI.
Formations en ligne
Accédez à des centaines de leçons à suivre à votre propre rythme, des parcours de formation axés sur les applications et commencez avec les tutoriels de configuration des produits.