Filtered Results

What to Use Ferrite, NI part number 711849-01 (included in kit) Screwdriver, 2.54 mm ( 0.10 in. ) flathead Primary power supply, 9 V to 30 V , 55 W minimum What to Do Complete the following steps to install ...

Figure 19. sbRIO-960x LEDs 2 4 1 3 Power LED Status LED User1 LED User FPGA1 LED Figure 20. sbRIO-962x/sbRIO-963x LEDs 1 5 2 3 4 Power LED Status LED User1 LED User FPGA1 LED SD In USE LED Parent

An sbRIO-96xx that heavily utilizes all of its performance and features consumes and dissipates substantially more power than an idle device. Consider the following options for reducing the die junction ...

Due to the small size of the sbRIO-96xx , it is very important to appropriately dissipate the heat generated during operation. You must plan for the thermal conditions of your application throughout development ...

Figure 14. sbRIO-960x RMC Connector Location and Dimensions 98.4 mm (3.87 in.) 96.7 mm (3.81 in.) 0.0 mm (0.00 in.) 0.0 mm (0.00 in.) 3.2 mm (0.13 in.) 40.0 mm (1.58 in.) Pin 1 Figure 15. sbRIO-962x/sbRIO-963x ...

The NI website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources to email and phone ...

The mounting method you use, components you select, and assembly techniques you use influence the ability of the system to resist fretting corrosion and other damage caused by exposure to shock and vibration. ...

Note Resetting the model through the RMC connection implements the same behavior as using the reset button on the model. Figure 18. Reset Button Behavior Press and hold RESET button fo r ≥ 5 s Press and ...

The sbRIO-96xx includes four onboard temperature monitoring sensors to simplify validation of a thermal solution by indicating thermal performance during validation and deployment. The sensors measure ...

The termination resistors (Rt) must match the nominal impedance of the CAN cable and therefore comply with the values in the following table. Table 21. Termination Resistor Specification Characteristic ...

81-90 de 440 résultats
9 de 44 pages