Filtered Results

I have a PXIe chassis that has PXI_CLK10 and PXIe_CLK100 system reference clocks. Some of the modules I have in my chassis only synchronize to PXI_CLK10 and some only synchronize to PXIe_CLK100. How are ...

I would like to synchronize the FPGA clock of my R Series or FlexRIO PXI(e) board to the PXI(e) 10 MHz or 100 MHz backplane clock. Is this possible, and if so, how do I do this?

Wake-on-LAN (WoL) is an Ethernet or Token Ring computer networking standard that allows a computer to be turned on or awakened by a network message.The message is usually sent to the target computer by ...

There are many reasons that you may want to power your PXI Chassis remotely, for example:​​​​​ In case the AC outlet loses power Ensuringthe chassis power is restored when the power goes off. Synchronize ...

I get an error when I try to self test my PXI or PXIe chassis. I can still see all of the modules inside, but a failure occurs when I perform the self test in NI MAX. There is no error code associated ...

In NI Measurement & Automation Explorer (MAX), I can see the modules inside my PXI chassis, but I can't see the chassis itself. When I plugged mychassis into my computer, it appeared for a moment in NI ...

I am simulating two or more PXI(e) devices in NI MAX. When I try to create a task in MAX or LabVIEW using these simulated devices, I get the following error: Error -200862 One or more devices from a multiple ...

I have a PXI device that I would like to use with a Compact PCI (cPCI) chassis. What are important considerations when doing this?

I'm not getting the P2P transfer rate I expect. What do I configure? My P2P application works fine with a PXIe-8135 controller, but suffers reduced throughput with another controller such as PXIe-8133, ...

31-40 de 352 résultats
4 de 36 pages