Filtered Results

Restart the system. Launch MAX, and perform the self-test again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test again. Parent topic: ...

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Use one of the following cables for connections to the Digital Data and Control (DDC) connector on the NI 6544/6545/6547/6548 . NI 6544/6545/6547/6548 shielded single-ended cable with individual microcoaxial ...

Connect the NI CB-2162 single-ended digital I/O accessory to access the DDC connector on the device, to terminate the DIO channels on the device, or to develop a platform for prototyping circuits and testing ...

Many common NI digital waveform generator/analyzer applications require you to create a custom accessory to access the signals of your device under test (DUT). To connect a custom accessory to the VHDCI ...

During dynamic acquisition, the device under test (DUT) generating the signals must have a matched source impedance as close to 50 Ω as possible in order to minimize signal reflections and maintain optimal ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

The NI 6544/6545/6547/6548 front panel exposes the following connections: Three SMA connectors named CLK IN, PFI 0 , and CLK OUT One 68-pin VHDCI connector named DIGITAL DATA & CONTROL, or DDC Figure 2. ...

To verify your device configuration, use the device test panel in MAX to generate simple digital data using the NI 6544/6545/6547/6548.

11-20 de 37 résultats
2 de 4 pages