Filtered Results

Select Start»All Programs»NI»R Series Multifunction RIO»Calibrate 78xxR Device to launch the NI 78xxR Calibration Utility.

Right-click one of the following R Series devices in the Project Explorer window and select Change I/O Configuration from the shortcut menu to display this dialog box.

Several NI R Series Multifunction RIO targets contain onboard DRAM that is directly accessible from the LabVIEW FPGA VI. LabVIEW allows DRAM to be accessible as an FPGA Memory Item. Refer to the specifications ...

To ensure compatibility with other NI R Series devices, configure trigger pulses on an NI PXI R Series device to last for at least two clock cycles of the clock on the receiving device. For example, if ...

All of the digital lines on the R Series devices are bidirectional. These lines can be individually configured for input or output. Internal to the R Series device, a Digital Enable (DE) signal controls ...

Use the FPGA memory item interface to use DRAM in the same way that you use block memory and look-up tables (LUT). DRAM memory items appear in the Project Explorer window under the FPGA target. The FPGA ...

You can use an FPGA I/O Node, configured for reading and writing, with the PCI-7811R. Use the following digital port assignments when you configure digital port functions.

You can use an FPGA I/O Node, configured for reading and writing, with the PCI-7813R. Use the following digital port assignments when you configure digital port functions.

You can use an FPGA I/O Node, configured for reading and writing, with the PXIe-7820R. Use the following digital port assignments when you configure digital port functions.

11-20 de 195 résultats
2 de 20 pages