Résultats de la recherche

1-30 de 54 résultats

... TBX-68,NI BNC-2111,NI BNC-2110,NI BNC-2120,NI BNC-2121,NI ...

https://www.ni.com/en-us/support/downloads/drivers/download.ni-daqmx.html

... Certifications BNC-2111 Product Certifications BNC-2111 Product ... 192596-01L CCA,BNC-2111 Symbol Description Certification EU ...

https://www.ni.com/en-us/support/documentation/product-certifications/model.bnc-2111.html

BNC-2111 Dimensional Drawings

... Drawings BNC-2111 Dimensional Drawings BNC-2111 Dimensional ... for the BNC-2111. 2D Dimensional Drawings PDF DXF 3D ...

https://www.ni.com/en-us/support/documentation/dimensional-drawings/model.bnc-2111.html

Floating Signal Voltage Reading Saturates to Full-Scale

... BNC-2121 BNC-2111 BNC-2120 SC-2050 SC-2345 Multifunction ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019MZZSA2&l=en-US

Getting Started With NI R Series for USB Part 1: Introduction

This tutorial provides step–by-step instructions for setting up your USB R Series device, adding it to a project, and creating an analog input acquisition using a DMA FIFO. Requirements Software LabVIEW ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YHblCAG&l=en-US

How Do I Use Built-In Cold Junction Compensation (CJC) When Creating Virtual Channels?

I am using a terminal block (or SCXI module) with built-in Cold Junction Compensation (CJC). However, when I am creating my virtual channels in Measurement & Automation Explorer, I am not given the option ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000004BGmSAM&l=en-US

Software Support for CompactRIO, CompactDAQ, Single-Board RIO, R Series, and EtherCAT

This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at ni.com/manuals for each device. Note: Your ...

https://www.ni.com/en-us/support/documentation/compatibility/09/software-support-for-compactrio--compactdaq--single-board-rio--r.html

Archived: BNC-2111 Installation Guide (April 1994) - Archived: BNC-2111 Installation Guide (April 1994)

... Archived: BNC-2111 Installation Guide (April 1994) Archived: BNC-2111 Installation Guide (April 1994) Tags: ... id="ariaid-title1">Archived: BNC-2111 Installation Guide (April 1994) Note ...

https://www.ni.com/docs/en-US/bundle/374098b/page/download.html

63xx Models : DAQ Multifunction I/O Cable and Accessory Compatibility

... BNC-2110 BNC-2111 BNC-2120 BNC-2090A BNC-20901 TB-27062 ... mode. The BNC-2111 only supports single-ended measurements. Thus the BNC-2111 can not be used with these modules and ...

https://www.ni.com/en-us/support/documentation/supplemental/16/63xx-models---daq-multifunction-i-o-cable-and-accessory-compatib.html

62xx Models : DAQ Multifunction I/O Cable and Accessory Compatibility

... BNC-2110 BNC-2111 BNC-2120 BNC-2090A BNC-20901 TB-27062 ... BNC-2110 BNC-2111 BNC-2120 BNC-2090A BNC-20901 N/A SCC-68 ...

https://www.ni.com/en-us/support/documentation/supplemental/16/62xx-models---daq-multifunction-i-o-cable-and-accessory-compatib.html

NI DAQ Device Custom Cables, Replacement Connectors, and Screws

... BNC-2110 BNC-2111 BNC-2115 BNC-2120 BNC-2121 BNC-2090A ...

https://www.ni.com/en-us/support/documentation/supplemental/15/ni-daq-device-custom-cables--replacement-connectors--and-screws.html

Main Page : DAQ Multifunction I/O Accessory Guide

... Differential AI BNC-2111 - DIN Rail2 Single-Ended AI BNC-2115 ...

https://www.ni.com/en-us/support/documentation/supplemental/17/main-page---daq-multifunction-i-o-accessory-guide.html

Archived: 60xx/60xxE Models: DAQ Multifunction I/O Cable and Accessory Compatibility Guide

... BNC-2110 BNC-2111 BNC-2120 BNC-2090A BNC-20901 TB-27052 ... BNC-2110 BNC-2111 BNC-2120 BNC-2090A BNC-20901 N/A SCC-68 ... BNC-2110 BNC-2111 BNC-2120 BNC-2090A BNC-20901 N/A SCC-68 ...

https://www.ni.com/en-us/support/documentation/supplemental/17/archived--60xx-60xxe-models--daq-multifunction-i-o-cable-and-acc.html

BNC 2110 2111 synchronization

... including 2 BNC-2111 and 3 BNC-2110 with DAQCARDs 6062 in ...

https://forums.ni.com/t5/Dynamic-Signal-Acquisition/BNC-2110-2111-synchronization/td-p/2112056

PCIe 6363 with BNC-2111

... 6363 with BNC-2111 PCIe 6363 with BNC-2111 svacek Member ... Is the BNC-2111 compatible with the PCIe-6363.. Although ... lists the BNC-2111 as a possible accessory, the BNC-2111 ...

https://forums.ni.com/t5/Multifunction-DAQ/PCIe-6363-with-BNC-2111/td-p/3057801

Solved: Digital Output 6052E BNC-2111

... 6052E BNC-2111 Solved! Go to solution Digital Output 6052E BNC-2111 Homayoun Member ‎10-25-2017 05:41 PM ... DAQ and BNC-2111. I used NI-MAX test panel to make sure ...

https://forums.ni.com/t5/Digital-I-O/Digital-Output-6052E-BNC-2111/td-p/3707962

test panel in MAX and BNC-2111

... MAX and BNC-2111 test panel in MAX and BNC-2111 Yin Member ... on the BNC-2111, it doesn't work out. Anyone have any ... AI 0 on BNC-2111 is actually AI 16, and AI 15 on BNC-2111 ...

https://forums.ni.com/t5/LabVIEW/test-panel-in-MAX-and-BNC-2111/td-p/553932

Hardware timed digital output (NI PCIe-6351 + BNC-2111)

... PCIe-6351 + BNC-2111) Hardware timed digital output (NI PCIe-6351 + BNC-2111) huwcy Member ‎08-15-2013 05:36 PM Options ... PCIe-6351 + BNC-2111) I don't have direct access to port0 ...

https://forums.ni.com/t5/Digital-I-O/Hardware-timed-digital-output-NI-PCIe-6351-BNC-2111/td-p/2526342

Can I read strain gage data on the BNC-2111? If so, how?

... on the BNC-2111? If so, how? Can I read strain gage ... on the BNC-2111? If so, how? MurrayC Member ‎07-08-2009 ... have a BNC-2111 hooked up to the computer operating ...

https://forums.ni.com/t5/SignalExpress/Can-I-read-strain-gage-data-on-the-BNC-2111-If-so-how/td-p/941250

how can i use daq PCI-3036E with BNC 2111 to read a quadrature encoder

... PCI-3036E with BNC 2111 to read a quadrature encoder how can ... PCI-3036E with BNC 2111 to read a quadrature encoder yasser ... PCI-6036E to a BNC-2111 (see the BNC-2111 Manual, Table 2, page ...

https://forums.ni.com/t5/Multifunction-DAQ/how-can-i-use-daq-PCI-3036E-with-BNC-2111-to-read-a-quadrature/td-p/526548

I'm looking for a way to use my BNC-2111 connector block to read a quadrature encoder with my PCI-6033E

... use my BNC-2111 connector block to read a quadrature ... use my BNC-2111 connector block to read a quadrature ... use my BNC-2111 connector block connected to DAQ PCI-6033E ...

https://forums.ni.com/t5/Counter-Timer/I-m-looking-for-a-way-to-use-my-BNC-2111-connector-block-to-read/td-p/526267

Cross talk between two DAQs

... using BNC 2111 (PCI 6221) on one system and USB 6008 ... two at BNC 2111; one goes into BNC2111 and other goes ... data at BNC 2111. So to solve this problem I was think ...

https://forums.ni.com/t5/Multifunction-DAQ/Cross-talk-between-two-DAQs/td-p/1985937

PCI-6251 Inter chennal effect is modifying signal.

... PCI-6251 with BNC-2111, now if i connect cable in chennal 2 ... using BNC 2111), so how do i connect them to ground?? ... to the BNC-2111 or are there some signal conditioning ...

https://forums.ni.com/t5/LabVIEW/PCI-6251-Inter-chennal-effect-is-modifying-signal/td-p/535552

PCI 6259 Counter 0 for encoder input using simulink real-time windows target

... PCI-6259, BNC-2111 (only using connector 0) Driver: NI-DAQmx ... on my BNC-2111 box. There are 5 PFI BNC connectors ...

https://forums.ni.com/t5/Counter-Timer/PCI-6259-Counter-0-for-encoder-input-using-simulink-real-time/td-p/1860279

Splitting the sensor analog signal to two bnc terminal block

... blocks, BNC 2111 and USB 6211. Former is used for Labview ...

https://forums.ni.com/t5/Real-Time-Measurement-and/Splitting-the-sensor-analog-signal-to-two-bnc-terminal-block/td-p/4023053

Solved: multiple TTL finite pulse trains

... connector box BNC-2111. Aim is to generate three TTL pulse ... with the BNC 2111. You can route the signal from the counter ... on the BNC 2111 connector block with the following syntax ...

https://forums.ni.com/t5/Counter-Timer/multiple-TTL-finite-pulse-trains/td-p/2732529

Digital I-O Configuring

... 6024E and BNC 2111 connector block. and NI-DAQmx Ver8.6 ... bought our BNC-2111 connector block. Only one time we tested ...

https://forums.ni.com/t5/Multifunction-DAQ/Digital-I-O-Configuring/td-p/695223

Error 200546, external calibration failed and the external calibration data has not been saved

... AI8 on BNC 2111 box. Please feel free to contact me ... 06:35 AM bnc_2111.JPG ‏70 KB 0 Kudos Message 2 of 2 (2,030 ...

https://forums.ni.com/t5/Multifunction-DAQ/Error-200546-external-calibration-failed-and-the-external/td-p/510890

Digital I-O Configuring

... 6024E and BNC 2111 connector block. and NI-DAQmx Ver8.6 ...

https://forums.ni.com/t5/Multifunction-DAQ/Digital-I-O-Configuring/td-p/695224

Problem while generating sinewave on a PCI 6722 with MAX

... list the BNC-2111 as an accessory option. This is a typing ... select the BNC-2111 as the accessory. This properly configures ... connection : BNC-2111 Channel AO Channel AO 0 AO 0 AO 1 AO ...

https://forums.ni.com/t5/Multifunction-DAQ/Problem-while-generating-sinewave-on-a-PCI-6722-with-MAX/td-p/635886

01 02

1-30 de 54 résultats

1 de 2 pages