Filtered Results

Restart the system. Launch MAX, and perform the self-test again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test again. Parent topic: ...

You can generate signals interactively using InstrumentStudio or you can use the NI-DCPower instrument driver to program your device in the supported ADE of your choice.

There are several required items not included in your device kit that you need to operate the NI 4110 . Your application may require additional items not included in your kit to install or operate your ...

These specifications apply to the PXI-4110 with APS-4100 Auxiliary Power Supply and the PXI-4110 without auxiliary power supply.

Notice To prevent damage to the NI 4110 caused by ESD or contamination, handle the module using the edges or the metal bracket. Ensure the AC power source is connected to the chassis before installing ...

You must be an Administrator to install NI software on your computer. Install an ADE, such as LabVIEW or LabWindows™/CVI™. Download the driver software installer from ni.com/downloads . NI Package Manager ...

This document explains how to install, configure, and test the NI 4110 . Note Before you begin, install and configure your chassis and controller.

Figure 1. NI 4110 Kit Contents 1 2 3 4 7 8 9 10 5 6 NI PXI-4110 Power Supply 6-position MINI-COMBICON Connector 2-position MINI-COMBICON Connector Backshell for 6-position MINI-COMBICON Connector Backshell ...

Visit ni.com/support to find support resources including documentation, downloads, and troubleshooting and application development self-help such as tutorials and examples. Visit ni.com/services to learn ...

If an issue persists after you complete a troubleshooting procedure, search our KnowledgeBase for additional information our technical support engineers create as they answer common user questions and ...

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically ...

Caution Always refer to the specifications document for your device before connecting signals. Failure to observe the specified maximum signal ratings can cause shock, a fire hazard, or damage to the devices ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

In the MAX configuration tree, expand Devices and Interfaces . Expand the Chassis tree to see the list of installed hardware, and press to refresh the list. If the module is still not listed, power ...

You can manipulate the aperture time of measurements made with NI-DCPower instruments to reject specific AC noise frequencies in DC voltage and current measurements.

All of the input and output connections on the PXI-4110 have user-replaceable fuses.

Internal Power Voltage Feedback Auxiliary Power (Isolated Channels Only) Transformer Rectifier and Filter Preregulation Control Power Amplifier (Isolated Channels Only) Power Switch Linear Regulation Current ...

1-20 de 32 résultats
1 de 2 pages