Filtered Results

Complete the following steps to connect one or more NI-9154 chassis to a MXI-Express host system or a target. Make sure the MXI-Express host system is set up and configured as described in the MXI-Express ...

Some products are approved for marine (shipboard) applications. To verify marine approval certification for a product, visit ni.com/product-certifications , search by model number, and click the appropriate ...

Always power down the host system before powering down any connected NI-9154 chassis. When the host system is powered down, the order in which the NI-9154 chassis are powered down is not important. Parent ...

The following table lists the reset options available for the NI-9154 . These options determine how the chassis behaves when it is powered on in various conditions. Use the RIO Device Setup utility to ...

Ensure that the environment in which you are using the NI-9154 meets the following specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) 0 °C to 55 °C Operating humidity (IEC 60068-2-78) ...

Complete the following steps to remove a C Series I/O module from the chassis. Make sure that no I/O-side power is connected to the I/O module. If the system is in a nonhazardous location, the chassis ...

The NI-9154 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous locations; Class I, Zone 2 , AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations; and nonhazardous locations ...

Caution Observe all instructions and cautions in the user documentation. Using the model in a manner not specified can damage the model and compromise the built-in safety protection. Return damaged models ...

The NI-9154 has been evaluated as Ex nA IIC T4 Gc equipment under DEMKO 12 ATEX 1202658X and is IECEx UL 14.0089X certified. Each device is marked II 3G and is suitable for use in Zone 2 hazardous locations, ...

1-10 de 77 résultats
1 de 8 pages