Filtered Results

The LabVIEW FPGA Module includes component-level intellectual property (CLIP) for HDL IP integration. FlexRIO devices support two types of CLIP: user-defined and socketed.

FlexRIO includes several example applications for LabVIEW. These examples serve as interactive tools, programming models, and as building blocks in your own applications. Parent topic: NI 6581/6581B Getting ...

Table 1. FlexRIO Documentation Locations and Descriptions Document Location Description Getting started guide for your FlexRIO FPGA module or Controller for FlexRIO Available from the Start menu and at ...

The following figure shows the digital data connector (DDC) pin assignments for the NI 6581/6581B . Refer to the NI 6581/6581B Specifications for signal information. Figure 2. NI 6581/6581B Connector Pin ...

Note Before you begin, complete the software and hardware installation instructions in the getting started guide for your FlexRIO FPGA module or Controller for FlexRIO. The NI 6581/6581B is a FlexRIO adapter ...

Refer to the getting started guide for your FlexRIO FPGA module or Controller for FlexRIO for instructions about how to install your FlexRIO system, including the NI 6581/6581B . Parent topic: NI 6581/6581B ...

You can use one of the internal power options shown in the following table to power one or both DDC connectors. Table 6. Internal Power Supply Voltage Settings Voltage Setting in LabVIEW 3.3 V 0 2.5 V ...

This CLIP provides read/write access to all digital I/O (DIO) channels using a single channel-based interface. Each grouping of eight I/O channels has a write enable signal. In the LabVIEW FPGA Module, ...

You can power the NI 6581/6581B internally, or externally through a variable power supply.

The following table lists the NI 6581/6581B power supply control signals and the corresponding FlexRIO FPGA module signals. Table 5. NI 6581/6581B Power Supply Control Signals and FlexRIO FPGA Module Signals ...

1-10 de 30 résultats
1 de 3 pages