Filtered Results

Skip to Content BookmarksWatch ListSearch PreferencesLog in NI High-Speed Digitizers Getting Started Guide • Last Updated: 2022-04-30 • Tags:  ○ Getting Started ○ USB-5133 ○ USB-5132 ○ PXIe-5622 ○ PXIe-5186 ...

The LEDs may not light until the module has been configured in MAX. Before proceeding, verify that the PXI/PXIe/PCI-5122 appears in MAX. If the ACCESS LED fails to light after you power on the chassis, ...

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which devices reside in the system and how they are configured. MAX is automatically installed ...

This product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications. These requirements and limits provide reasonable ...

Figure 3. PXI/PXIe/PCI-5122 Front Panels ACCESS ACTIVE CH 0 CH 1 CH 1 CH 0 TRIG TRIG AUX I/O AUX I/O +5 V MAX 5 V MAX CLK IN CLK IN CLK OUT CLK OUT Table 1. PXI/PXIe/PCI-5122 Front Panel

In the MAX configuration tree, expand Devices and Interfaces . Expand the Chassis tree to see the list of installed hardware, and press to refresh the list. If the module is still not listed, power ...

Power off and unplug the computer. Access the computer system expansion slots. This step might require you to remove one or more access panels on the computer case. Locate a compatible slot and remove ...

DISCOVER S e r v i ce s n i . c o m / s e r v i c e s NI Community n i . c o m/community Support ni.com/support NI Oscilloscopes ni.com/oscilloscope CREATE LEARN Getting Started

3 2 1 4 NI PXI/PXIe/PCI-5122 Driver Software DVD NI PXI/PXIe/PCI-5122 Getting Started Guide Maintain Forced-Air Cooling Note to Users Parent topic: Unpacking the Kit

Self-calibration is done on software command. The calibration corrects for gain, offset, frequency response, triggering, and timing adjustment errors for all input ranges.

1-10 de 34 résultats
1 de 4 pages