Filtered Results

Conditions Specifications are typical and valid at -40 °C to 85 °C unless otherwise noted. Input Characteristics Number of channels8 analog input channelsIsolation Galvanic isolation between channels and ...

Conditions Specifications are typical and valid at -40 °C to 85 °C unless otherwise noted. Input Characteristics Number of channels8 analog input channelsIsolation Galvanic isolation between channels and ...

You can use the FieldDAQ device as expansion I/O from certain NI Linux Real-Time controllers. Discover and configure the NI Linux Real-Time controller in NI MAX, then discover and configure the FieldDAQ ...

The onboard 100 MHz oscillator automatically synchronizes to other network-synchronized devices that are part of your local IEEE 802.1AS subnet. The 13.1072 MHz, 12.8 MHz, 12.288 MHz, and 10.24 MHz Timebases ...

Recommended networking topologies are described in this section. Host—Can be a Windows computer or a real-time controller with the NI Linux Real-Time operating system, such as the IC-317x, cRIO-9035/9039 ...

8-Channel Sound and Vibration Input Device for FieldDAQ Multiple input ranges with 24-bit resolution and 102.4 kSamples/s for the most accurate microphone and accelerometer measurements Built-in IEPE signal ...

Front PanelPower IN ConnectorPower LEDEthernet Port 0 and LEDBank 1 Input Connectors 0 through 3 and LEDsBank 2 Input Connectors 0 through 3 and LEDsMounting HolesPower OUT ConnectorSTATUS LEDEthernet ...

The cDAQ-9185/9189 and FieldDAQ Firmware FOSS Notices (NI part number 377121x-01) document contains information about open source code use and software licenses for FieldDAQ firmware versions. To view ...

Unpacking What You Need to Get Started Wiring External Power to the FieldDAQ Device Setting up the FieldDAQ Device Connecting to a Real-Time Controller Troubleshooting Device Connectivity Reserving the ...

In a line topology—also known as daisy-chaining or bus topology—the host communicates directly with all nodes through one bus line. A standard Ethernet device or switch can be added to the end of the chain ...

1-10 de 55 résultats
1 de 6 pages