En raison de mises à jour du système, ni.com peut être indisponible à partir de 9:00 AM - 12:00 PM CDT on Saturday, June 6th

Real-Time [c]FieldPoint Controllers and LabVIEW Real-Time Compatibility

Aperçu

This page shows supported versions of the Real-Time [c]FieldPoint Controllers with LabVIEW Real-Time development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

Note that this article replaces KnowledgeBase 4KMFG8AM:Recommended LabVIEW Real-Time Versions for Real-Time [c]FieldPoint Controllers. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.

Real-Time [c]FieldPoint Controllers and LabVIEW Real-Time Compatibility

Use this table to compare Real-Time [c]FieldPoint Controllers and LabVIEW Real-Time Compatibility
LabVIEW Real-Time Version [c]FieldPoint Version
[c]FP-22xx [c]FP-21xx [c]FP-20xx FP-20xx
2015 SP1    
2015    
2014 SP1    
2014    
2013 SP1    
2013    
2012 SP1    
2012    
2011 SP1    
2011    
2010 SP1    
2010    
2009 SP1    
2009    
8.6.1    
8.6    
8.5.1
8.5  
8.2.1  
8.2  
8.0  
7.1.1    
7.1    


Compatible


Note:All [c]FieldPoint network interface modules are compatible with LabVIEW 2015**, 2014**, 2013**, LabVIEW 2012**, 2011, 2010, 2009, 8.x, and 7.x.

**Removed support for [c]FP160x in LabVIEW 2012 onwards.