This document describes the range of software versions required for the aforementioned devices and links to the most recent documentation resources available at the NI Product Documentation Center for each device.
Reference the information on the NI Hardware and Software Operating System Compatibility page to ensure your selected hardware, software, and driver combination is supported on your desired operating system.
NI recommends that you always use the most recent software for your system when possible.
Select your hardware from the drop-down below to view the software support.
Showing information for:
Note: LabVIEW support listed is referencing LabVIEW 32-bit. For LabVIEW 64-bit please confirm compatibility with the documentation.
Most recent documentation for this device
Minimum Software Support
|Software||FPGA Interface||Scan Interface||NI-DAQmx||EtherCAT (FPGA Interface)||EtherCAT (Scan Interface)|
|LabVIEW FPGA Module|
|LabVIEW Real-Time Module|
|Device Driver Software|
|Other Minimum Software|
NI 9151 R Series Expansion Chassis Compatibility with LabVIEW
|Not Supported||Supported||Supported with Performance Limitations*||Not Applicable|
|Notes||* Some devices may experience performance limitations when used with the NI 9151.|