From 9:00 AM - 12:00 PM CDT on Saturday, June 6th, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Supported Hardware for NI-Embedded CAN for RIO

Overview

This document lists all supported hardware for NI-Embedded CAN for RIO.

The NI-Embedded CAN for RIO software supports the following National Instruments hardware products:

  • Onboard CAN interfaces of Single-Board RIO-9605/9606 — NI-RIO 4.0 or later and LabVIEW 2011 or later required.
     

NI sbRIO-9605
NI sbRIO-9606

  • Onboard CAN interfaces of Single-Board RIO-9623/9626/9633/9636 — NI-RIO 12.0 or later and LabVIEW 2012 or later required.
     

NI sbRIO-9623
NI sbRIO-9626
NI sbRIO-9633
NI sbRIO-9636

  • NI sbRIO-9651 System on Module (SOM) Development Kit — NI-RIO 14.0 or later and LabVIEW 2014 or later required.
     

NI sbRIO-9651 System on Module Development Kit

  • NI roboRIO - NI-RIO 14.0 or later and LabVIEW 2014 or later required.
     
  • Onboard CAN interfaces of Single-Board RIO-9607/9627/9637 — NI-RIO 15.0 or later and LabVIEW 2015 or later required.
     

NI sbRIO-9607
NI sbRIO-9627
NI sbRIO-9637

The NI-Embedded CAN for RIO software supports a partial list of the Single-Board RIO hardware. Refer to Single-Board RIO - National Instruments for a full list of the Single-Board RIO hardware.