FieldPoint Analog Output Example - FP-AO-2xx Modules (LabVIEW 6.1)

Publish Date: Sep 06, 2006 | 0 Ratings | 0.00 out of 5 | Print | Submit your review
You can use this VI to continuously output eight analog voltage or current signals on the FP-AO-200/210. It is a very basic VI that calls four main FieldPoint subVIs.

FP Create
FP Write (Polymorphic).vi

These FieldPoint VIs are installed with FieldPoint.

1. Select the FP module to use.
2. Specify the "IAK File Path", or leave it blank and the VI will use the most recently used IAK file.
3. Edit the "Comm Resource Name", "Device Name", and "Item Name" inputs
to match the IAK file configuration that you created in FieldPoint Explorer.
4. Close FieldPoint Explorer.
5. Run this VI.

NOTE: This VI is a combination of two example VIs shipped with FieldPoint. These two VIs, and, can be found on your local hard drive at:
C:\Program Files\National Instruments\LabVIEW\examples\FieldPoint\Analog Out

Back to Top

Bookmark & Share





Rate this document

Answered Your Question?
Yes No