PXI-6512
comenzando en $1,260.00
778969-01
64-Channel, ±30 VDC, Source Outputs, Bank-Isolated PXI Digital I/O Module
Descripción general
The PXI-6512 is an industrial digital output interface, with eight banks of isolated channels. With programmable power-up states, you can configure the initial output states in software to ensure safe operation when connected to industrial actuators. If a computer or application fault occurs, the PXI-6512 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions.
Artículos incluidos
- Module
- Safety, Environmental, & Regulatory documentation
PXI-6512 Detalles
Números de parte (1) Precio | 778969-01 |
|---|---|
| NI Lead Time | 6-7 weeks |
| Bus Connector | PXI Hybrid |
| Single-Ended Digital I/O Channel Current Drive | 350 mA |
| Digital I/O Logic Levels | 24 V |
| Number of Digital Input Only Channels | — |
| Number of Digital Output Only Channels | 64 |
| Number of Bidirectional Digital Channels | — |
| Digital Input Voltage Range | — |
| Output Voltage Range | 0 V to 30 V |
| Maximum Clock Rate | — |
| Signaling Type | Single-Ended |
| Reconfigurable | — |
| Maximum Sample Rate | — |
| Number of Analog Input Channels | — |
| Maximum Digital Update Rate | — |
| Maximum Analog Update Rate | — |
| Number of Analog Output Channels | — |
| Operating Temperature Range | — |
| Bus Connection | PXI Hybrid |
| Current Flow Direction | — |
| Digital I/O Isolation | — |
| Front Connection Type | SCSI Type(1) |
| Number of Counters/Timers | — |
| Number of External Clock Inputs | — |
| Relay Type | — |
| Supports Peer To Peer Streaming | — |
| Supported Hardware Platform | PXI |
| Digital I/O Termination | — |
| Duplex | — |
| Dynamic RAM (DRAM) | — |
| Maximum Acquisition Rate | — |
| Maximum Generation Rate | — |
| Maximum Active Load | — |
| Maximum Data Rate | — |
| Module Width | 1 |
| Onboard Memory | — |
| Supports Hardware Compare | — |
| Supports PMU | — |
| Descripción del producto | NI PXI-6512 Industrial 64 Source DO, Bank Isolated DO & NI-DAQ |
PXI-6512 Accesorios y software
- Modelo (Número de parte)DescripciónImagenNúmeros de parte compatiblesSH100M-100M Flex Cable (185095-01)Cable Assy, Type SH100-100-Flex, 1 m778969-01R100M-50F-50F Cable (182762-02)R1005050 Ribbon Cable, 2 m778969-01
- Modelo (Número de parte)DescripciónImagenNúmeros de parte compatiblesSCB-100A (785024-01)SCB-100A Noise Rejecting, Shielded I/O Connector Block778969-01CB-50 (776164-90)CB-50 I/O Connector Block with DIN Rail Mounting without cable778969-01CB-50LP (777101-01)CB-50LP Low-Cost, Unshielded I/O Connector Block778969-01
- Producto (Número de parte)DescripciónCasos de uso recomendadosFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Recursos
Soporte
Solicitar soporte
Puede solicitar un servicio de reparación, programar calibración u obtener soporte técnico. Es posible que se requiera un contrato de servicio válido.
Comunidad de NI
Haga preguntas, explore soluciones y participe en discusiones con otros miembros de la Comunidad de NI.
Documentos de soporte
Busque respuestas a las preguntas más frecuentes y consejos redactados por los ingenieros de NI para corregir errores comunes.
Cursos de capacitación en línea
Acceda a cientos de cursos que puede completar a su propio ritmo y a trayectorias de aprendizaje centradas en aplicaciones, y comience a trabajar con la ayuda de tutoriales de configuración de productos.