De 8:00 PM Friday, July 23 - 7:00 PM CDT Saturday, July 24, estaremos realizando actualizaciones del sistema en ni.com, por lo que es posible que ocurra una interrupción temporal del servicio. Agradecemos mucho su paciencia mientras mejoramos la experiencia en línea.

NI SH100-68-68 Signal Mapping or Wire Pinout

Visión General

If you are using the SH100-68-68 (SH1006868) cable to connect your 100-pin NI 60xxE (formerly E Series) Data Acquisition (DAQ) board to one or two 68-pin accessories, this article will give you the signal mapping or wire pinouts for the two 68-pin connectors on the cable.

SH100-68-68 MIO-16 and Extended I/O Connector Signal Mapping or Wire Pinout

When you use an NI 6031E, NI 6033E or NI 6071E with an SH100-68-68 cable, the I/O signals appear on two 68-pin connectors, shown below.

 

 

When you use an NI 6025E with an SH100-68-68 cable, the I/O signals appear on two 68-pin connectors, shown below.

 

 

This information is also available in the E Series User Manual.