Sound and Vibration Measurement Suite 2017 Bug Fixes

Overview

This document contains the Sound & Vibration Measurement Suite 2017 bug fixes that were correct before the release of Sound & Vibration Measurement Suite 2017. Not every issue corrected by NI will appear on this list; it is intended to only show the severe and common issues.

Bug Fixes

The following items are Bug Fixes in Sound & Vibration Measurement Suite 2017.

IDProblem DescriptionIssue StatusVersion Fixed
331984Integration Filter Introduces Additional Phase ShiftClosed2017
524054SVL Integration on angular velocity should return cleaner unitsClosed2017
596577Signal duration control incorrectly wired to 'amplitude' input of SV Chirp Waveform.vi in SVL Measure Propagation Delay (DAQmx).vi shipping example with chirp test signal selectedClosed2017
599452SV DAQmx Configuration XControl does not enable IEPE current on Voltage channelsClosed2017
611895Full Spectrum absolute amplitudes are double actual valuesClosed2017
631135Pink Noise generation produces higher noise density than expected at high frequenciesClosed2017

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).