NI-XNET Driver and LabVIEW Compatibility
Visión General
This page shows supported versions of the NI-XNET hardware driver with LabVIEW development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).
Note that this article replaces KnowledgeBase 50OG2J1N:NI-XNET Driver and LabVIEW Compatibility. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.
NI-XNET Driver and LabVIEW Compatibility
Note: LabVIEW 64-bit support was introduced with XNET 14.0. For more information, refer to the NI-XNET driver readme files available on the download page for each respective version of NI-XNET.
In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.
| NI-XNET Version | LabVIEW Version | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | |
| 21.0 | |||||||||
| 20.5.1 | |||||||||
| 20.0 | |||||||||
| 19.6 | |||||||||
| 19.5 | |||||||||
| 19.0 | |||||||||
| 18.5 | |||||||||
| 18.0 | |||||||||
| 17.5 | |||||||||
| 17.0 | |||||||||
| 16.1 | |||||||||
Compatible
