This document contains information about all patches available for the following NI-DAQmx drivers:
The two fixed issues mentioned will help you decide whether to upgrade.
All issues fixed in each patch are listed in the tables below.
While NI encourages all users to update drivers to the most recent versions whenever possible, this update is strongly recommended for mioDAQ device users.
ID | Fixed Issue |
---|---|
2928587 | The mioDAQ device may enter a reboot loop if the firmware update was interrupted, potentially causing permanent damage to the device. |
2945840 | Under certain circumstances, the RSE terminal configuration of the mioDAQ SMIO device (USB-6451 or USB-6453) may produce inaccurate measurements when using ranges other than 10 Vpp. |
The NI-DAQmx 2024 Q4 Patch 1 can be installed over an existing NI-DAQmx 2024 Q4 or as a standalone installation:
ID | Fixed Issue |
---|---|
2928587 | The mioDAQ device may enter a reboot loop if the firmware update was interrupted, potentially causing permanent damage to the device. |
2945840 | Under certain circumstances, the RSE terminal configuration of the mioDAQ SMIO device (USB-6451 or USB-6453) may produce inaccurate measurements when using ranges other than 10 Vpp. |
The NI-DAQmx 2024 Q3.1 Patch 1 can be installed over an existing NI-DAQmx 2024 Q3.1 or as a standalone installation: