NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
Archived: NI-CAN and LabWindows™/CVI Compatibility
Overview
Note: The last version of NI-CAN is 18.5. For continued support for using the CAN bus, use NI-XNET.
This page shows supported versions of the NI-CAN hardware driver with LabWindows CVI development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabWindows CVI palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).
NI-CAN and LabWindows/CVI Compatibility
In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.
| NI-CAN | LabWindows/CVI Version | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2017 | 2015 | 2013 | 2012 | 2010 | 2009 | 9.0 | 8.5 | 8.1 | 8.0 | |
| 18.5 | ||||||||||
| 18.0 | ||||||||||
| 17.0 | ||||||||||
| 16.0 | ||||||||||
| 15.0 | ||||||||||
| 14.0 | ||||||||||
| 2.7.x | ||||||||||
| 2.6.3 | ||||||||||
| 2.6.2 | ||||||||||
| 2.6.1 | ||||||||||
Compatible
Additional Resources
- White Paper: Controller Area Network (CAN) Overview
- KnowledgeBase KB 2V27R4HR: NI-CAN Driver Compatibility with LabVIEW and LabVIEW Real-Time
- KnowledgeBase KB 50OG2J1N: NI-XNET Driver and LabVIEW Compatibility
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
