Archived: NI-CAN and LabVIEW /LabVIEW RT Compatibility

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview

Note: The NI-CAN hardware driver version 18.5 is the last version released and compatibility stops at LabVIEW 2018. For continued support on LabVIEW and LabVIEW Real-Time applications using CAN, please use the NI-XNET hardware driver. Refer to Migrating NI-CAN Applications to NI-XNET to learn more.

 

This page shows supported versions of the NI-CAN hardware driver with LabVIEW / LabVIEW RT development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW / LabVIEW RT palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

Contents

NI-CAN and LabVIEW Compatibility

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare NI-CAN and LabVIEW Compatibility
NI-CANLabVIEW Version (32-bit)
2018201720162015201420132012201120102009
18.5      
18.0      
17.0      
16.0      
15.0      
14.0      
2.7.5      
2.7.4      
2.7.3       
2.7.2        

Compatible Version

NI-CAN and LabVIEW Real-Time Compatibility

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare NI-CAN and LabVIEW Real-Time Compatibility
NI-CANLabVIEW Version 
2018201720162015201420132012201120102009
18.5      
18.0      
17.0      
16.0      
15.0      
14.0      
2.7.5      
2.7.4      
2.7.3       
2.7.2        

Compatible Version

Was this information helpful?

Yes

No