The following items are notable issues fixed between the release of NI-XNET 2023 Q2 and NI-XNET 2023 Q4, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-XNET.
|
Bug Number |
Legacy ID |
Description |
Details |
|---|---|---|---|
| 2251664 |
Sending Multiple Data as Frames on AssignFrameIdRange is not SupportedThe LIN Specification indicates that multiple bits can be sent in a frame. If AssignFrameIdRange is used multiple times in a schedule, some data is lost and random values appear at the end of the
command. There might be discrepancies between the data defined in the LDF file and the data imported by NI-XNET.
Workaround: There is currently no known workaround for this issue. |
Reported Version: NI-XNET: 2022 Q3 Resolved Version: NI-XNET: 2023 Q4 Added: Oct 4, 2023 |
|
| 2250040 |
Burst of Frames Is Sent After J1939 Single-Point Session of Cyclic Frames ResumesAfter a J1939
Single-Point session of cyclic frames has been stopped and then restarted, NI-XNET sends a quick burst of transport protocol frames. See related bug 2261309, Messages Stay Paused After J1939 Single-Point Session of Cyclic Frames Resumes. Workaround: There is currently no known workaround for this issue. |
Reported Version: NI-XNET: 20.0 Resolved Version: NI-XNET: 2023 Q4 Added: N/A |
|
| 2251215 |
NI-XNET Component Fails to Load When Added to a LabVIEW ProjectWhen an XNET palette item is added to a blank VI in a
LabVIEW project, a conflict occurs in the project explorer dependency tree. After the project has been saved and closed, the component points to the wrong VI
paths. Affected files will display a status label such as "Conflict" or "Conflict has been deleted, renamed or moved on disk" next to their names in the project view. Workaround: First create the VI with the XNET content, and only then add it to the project and save the project. |
Reported Version: NI-XNET: 2023 Q1 Resolved Version: NI-XNET: 2023 Q4 Added: Oct 4, 2023 |
|
| 2360396 |
"File not Found" Message Appears When User Tries to Access XNET LV Project Examples on LinuxOn Linux systems, attempting to access NI-XNET LabVIEW project examples via the NI Example Finder results in the error:
“The file could not be found or opened. You may need to reinstall your examples.” This occurs because the example project directory, available on Windows installations, is not yet supported on Linux. Workaround: Access LabVIEW project examples on Windows platform.
|
Reported Version: NI-XNET: 21.0 Resolved Version: NI-XNET: 2023 Q4 Added: Oct 4, 2023 |
Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.
These patches currently do not have any special instructions.