Audio and Acoustics Test Software 23.3 Known Issues
Overview
This document contains the Audio and Acoustics Test Software known issues that were discovered before and since the release of Audio and Acoustics Test Software 23.3. Known issues are performance issues or technical bugs that NI has acknowledged exist within this version of the product.
Not every issue known to NI appears on this list; it is intended to show the most severe and common issues that you may encounter and provide workarounds when possible. Other technical issues that you may encounter could occur through normal product use or system compatibility issues. You may find more information on these issues in NI’s Product Documentation, Knowledgebase, or Community; see Additional Resources.
|
Bug Number |
Legacy ID |
Description |
Details |
|---|---|---|---|
| 2483712 |
The description of error -384510 is inaccurateThe description of error -384510 is as follows: Sync alignment failed. Check "sample rate" and "extra time for sync". Error -384510 occurred at Microphone and Speaker Test RA.lvlib:Mic Align Waveforms.vi<-Audio and Acoustics Debug Tool.vi The description is inaccurate. During microphone tests, error -384510 may occur when you don't use a trigger, or the actual propagation delay is larger than the max propagation delay value. Include relevant system information, steps to reproduce, and any workarounds. Workaround: Acquire the actual propagation delay with Calibrate Delay.exe or Audio and Acoustics Debug Tool.vi, and then compare the actual propagation delay with the max propagation delay value.
|
Reported Version: Audio and Acoustics Test Software 23.3 Resolved Version: N/A Added: Aug 31, 2023 |
|
| 2488536 |
An error occurs when launching the Audio and Acoustics Test Configurator for the first timeThe following error occurs when you launch the Audio and Acoustics Test Configurator for the first time with the TestStand adapter set to Runtime Engine.  Include relevant system information, steps to reproduce, and any workarounds. Workaround: Click Ignore or Launch LabVIEW before opening the Audio and Acoustics Test Configurator.
|
Reported Version: Audio and Acoustics Test Software 23.3 Resolved Version: N/A Added: Aug 31, 2023 |
Final Time Issue Listed
Issues found in this section will not be listed in future known issues documents for this product.
There are currently no issues to list.
Additional Resources
Explore Support Content and Product Documentation
Ask the NI Community
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country
Glossary of Terms
- Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com. You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
- Legacy ID – An older issue ID that refers to the same issue. You may instead find this issue ID in older known issues documents.
- Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
- Workaround - Possible ways to work around the problem.
- Reported Version - The earliest version in which the issue was reported.
- Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
- Date Added - The date the issue was added to the document (not the reported date).