Home Support Documentation Bugs

InstrumentStudio 2022 Q3 Bug Fixes

Created Jun 22, 2023

Overview

The following items are notable issues fixed between the release of InstrumentStudio 2022 Q2 and InstrumentStudio 2022 Q3, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of InstrumentStudio.

Bug Number

Legacy ID

Description

Details
1379795

FGEN Channels will stop outputting when entering Control mode in a debug panel

If you have an FGEN session running and open a panel in debug mode for monitoring, going into control mode will stop the FGEN output, and will not change even if you go back into monitor mode.

Workaround:

There is currently no known workaround for this issue.

Reported Version:

InstrumentStudio 2019

Resolved Version:

InstrumentStudio 2022 Q3

Added:

Oct 22, 2021
1921941

PXIe-4190: "Renew" compensation fails

Performing renew compensation (all compensation types) in charting mode returns Error -1074118418 ("The coefficients for open LCR compensation that are stored on the instrument are either in a deprecated format or are corrupted. Either do not use the stored coefficients or perform a new open LCR compensation to correct them."), and the device becomes disconnected. However, this is a panel-related error. The renew compensation procedure does complete properly, updates the onboard timestamp, and can be enabled (compensation is applied properly in subsequent runs).

Performing renew compensation in LCR sweep mode (when Allow single channel LCR sweep mode preview feature is enabled) returns Error -1074118545 ("When the Source Mode attribute/property is set to Single Point, the Active Sequence attribute/property must be set to an empty string.").

Workaround:

In the panel settings, set the Session Type to be Single channel (compatibility).

For sweep mode, perform renew compensation in charting mode and enable it in sweep mode.

Reported Version:

InstrumentStudio 2022 Q2

Resolved Version:

InstrumentStudio 2022 Q3

Added:

Apr 15, 2022

Additional Patch Information

Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.

These patches currently do not have any special instructions.

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).