PXIe-6535
Starting at $2,788.00
780695-01
32-Channel, 10 MHz, 40 MB/s PXI Digital I/O Module
Overview
The PXIe-6535 can continuously stream data over the PXI Express bus. It's an ideal solution for interfacing and testing image sensors or display panels. The module is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing. It features selectable voltage levels and per-channel directional control of the digital lines.
Included Items
- Module
- Safety, Environmental, & Regulatory documentation
PXIe-6535 Details
Part Numbers (1) Price | 780695-01 |
|---|---|
| NI Lead Time | 12-13 weeks |
| Bus Connector | PXI Express |
| Single-Ended Digital I/O Channel Current Drive | 32 mA |
| Digital I/O Logic Levels | 2.5 V#3.3 V#5 V TTL |
| Number of Digital Input Only Channels | — |
| Number of Digital Output Only Channels | — |
| Number of Bidirectional Digital Channels | 32 |
| Digital Input Voltage Range | -1 V to 6 V |
| Output Voltage Range | 0 V to 5 V |
| Maximum Clock Rate | 10 MHz |
| Signaling Type | Single-Ended |
| Reconfigurable | Yes |
| Maximum Sample Rate | — |
| Number of Analog Input Channels | — |
| Maximum Digital Update Rate | — |
| Maximum Analog Update Rate | — |
| Number of Analog Output Channels | — |
| Operating Temperature Range | — |
| Bus Connection | PXI Express |
| Current Flow Direction | — |
| Digital I/O Isolation | — |
| Front Connection Type | VHDCI(1) |
| Number of Counters/Timers | — |
| Number of External Clock Inputs | 2 |
| Relay Type | — |
| Supports Peer To Peer Streaming | — |
| Supported Hardware Platform | PXI |
| Digital I/O Termination | 50 kOhm |
| Duplex | — |
| Dynamic RAM (DRAM) | — |
| Maximum Acquisition Rate | 10 MB/s |
| Maximum Generation Rate | 10 MB/s |
| Maximum Active Load | — |
| Maximum Data Rate | 10 MB/s |
| Module Width | 1 |
| Onboard Memory | — |
| Supports Hardware Compare | — |
| Supports PMU | — |
| Product Description | NI PXIe-6535 Digital I/O (10 MHz, 2.5/3.3/5 V, PXI Express) |
PXIe-6535 Accessories and Software
- Model (Part Number)DescriptionImageCompatible Part NumbersTBX-68 (777141-01)TBX-68, 68-PIN Male SCSI Connector Block780695-01SCB-68A (782536-01)SCB-68A Noise Rejecting, Shielded I/O Connector Block780695-01CB-68LP (777145-01)CB-68LP Low-Cost, Unshielded I/O Connector Block780695-01
- Model (Part Number)DescriptionImageCompatible Part NumbersSHC68-C68-D4 Cable (781293-01)SHC68-C68-D4 Shielded Single-Ended Cable, 2 m780695-01C68-C68-D4 Cable (195949-01)C68-C68-D4 Unshielded Cable, 2X68-Position VHDCI Offset, 1 m780695-01SHC68-C68-D4 Cable (152870-01)SHC68-C68-D4 Shielded Single-Ended Cable, Low Leakage, 1m780695-01
- Product (Part Number)DescriptionRecommended use casesFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Resources
Support
Request support
You can request repair, schedule calibration, or get technical support. A valid service agreement may be required.
NI Community
Ask questions, explore solutions, and participate in discussions with other NI Community members.
KnowledgeBase
Search for answers to frequently asked questions and troubleshooting tips for common errors written by NI engineers.
Online training
Access hundreds of self-paced lessons, application-focused learning paths, and get started with product set-up tutorials.