PCI-6512
Starting at $788.00
778968-01
778973-01
64-Channel, ±30 VDC, Source Outputs, Bank-Isolated Digital I/O Device
Overview
The PCI-6512 is an industrial digital output interface, with eight banks of isolated channels. With programmable power-up states, you can configure the initial output states in software, to ensure safe operation when connected to industrial actuators. If a computer or application fault occurs, the PCI-6512 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions. Programmable input filters eliminate glitches/spikes and provide debouncing for digital switches/relays through a software-selectable digital filter.
Included Items
- Device
- Safety, Environmental, & Regulatory documentation
PCI-6512 Details
Part Numbers (2) Price | 778968-01 | 778973-01 |
|---|---|---|
| NI Lead Time | 10-11 weeks | 27-28 weeks |
| Bus Connector | PCI | PCI |
| Number of Bidirectional Digital Channels | 0 | 0 |
| Number of Digital Input Only Channels | 0 | 0 |
| Number of Digital Output Only Channels | 64 | — |
| Digital Input Voltage Range | — | — |
| Output Voltage Range | 0 V to 30 V | 0 V to 30 V |
| Maximum Clock Rate | — | — |
| Single-Ended Digital I/O Channel Current Drive | 350 mA | 350 mA |
| Reconfigurable | — | — |
| Maximum Sample Rate | — | — |
| Number of Analog Input Channels | — | — |
| Maximum Digital Update Rate | — | — |
| Maximum Analog Update Rate | — | — |
| Number of Analog Output Channels | — | — |
| Operating Temperature Range | 0 °C to 55 °C | 0 °C to 55 °C |
| Bus Connection | PCI | PCI |
| Current Flow Direction | Sourcing Output | Sourcing Output |
| Digital I/O Isolation | 30 VDC Bank Isolation | 30 VDC Bank Isolation |
| Digital I/O Logic Levels | 24 V | 24 V |
| Front Connection Type | SCSI Type(1) | SCSI Type(1) |
| Number of Counters/Timers | — | — |
| Number of External Clock Inputs | — | — |
| Relay Type | — | — |
| Signaling Type | Single-Ended | Single-Ended |
| Supports Peer To Peer Streaming | — | — |
| Supported Hardware Platform | Computer-Based Device | Computer-Based Device |
| Digital I/O Termination | — | — |
| Duplex | — | — |
| Dynamic RAM (DRAM) | — | — |
| Maximum Acquisition Rate | — | — |
| Maximum Generation Rate | — | — |
| Maximum Active Load | — | — |
| Maximum Data Rate | — | — |
| Module Width | — | — |
| Onboard Memory | — | — |
| Supports Hardware Compare | — | — |
| Supports PMU | — | — |
| Product Description | NI PCI-6512 Industrial 64 Source DO, Bank Isolated DO & NI-DAQ | PCI-6512 Bundle, CB-100 I/O Kit, NI-DAQ |
PCI-6512 Accessories and Software
- Model (Part Number)DescriptionImageCompatible Part NumbersSH100M-100M Flex Cable (185095-01)Cable Assy, Type SH100-100-Flex, 1 m778968-01R100M-50F-50F Cable (182762-02)R1005050 Ribbon Cable, 2 m778968-01
- Model (Part Number)DescriptionImageCompatible Part NumbersSCB-100A (785024-01)SCB-100A Noise Rejecting, Shielded I/O Connector Block778968-01CB-50 (776164-90)CB-50 I/O Connector Block with DIN Rail Mounting without cable778968-01CB-50LP (777101-01)CB-50LP Low-Cost, Unshielded I/O Connector Block778968-01
- Product (Part Number)DescriptionRecommended use casesFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Resources
Support
Request support
You can request repair, schedule calibration, or get technical support. A valid service agreement may be required.
NI Community
Ask questions, explore solutions, and participate in discussions with other NI Community members.
KnowledgeBase
Search for answers to frequently asked questions and troubleshooting tips for common errors written by NI engineers.
Online training
Access hundreds of self-paced lessons, application-focused learning paths, and get started with product set-up tutorials.