NI-9361
Starting at $1,310.00
783407-02
783407-01
32-Bit, 8-Channel C Series Counter Input Module
Overview
The NI-9361 is a differential or single-ended input module. With this module, you can expand beyond the four counters in CompactDAQ to reach up to 64 counters per 8-slot chassis. You can configure each channel to read a single pulse train or combine them to read up to four incremental encoders. You can also directly connect sensors with open-collector or push-pull outputs by using an internal switchable 1 kΩ pull-up resistor.
The NI-9361 counters can perform encoder position and velocity measurements. You can synchronize the counters with other analog, digital, and counter measurements in your chassis.
Included Items
- Module
- Safety, Environmental, & Regulatory documentation
Part Numbers (2) Price | 783407-02 | 783407-01 |
|---|---|---|
| NI Lead Time | 6-7 weeks | 7-8 weeks |
| Number of Counters/Timers | 8 | 6 |
| Digital Input Voltage Range | 0 V to 5 V#0 V to 24 V | 0 V to 5 V#0 V to 24 V |
| Front End Connection | 37-Pin, Male D-SUB | 37-Pin, Male D-SUB |
| Conformal Coated | Yes | No |
| Supported Hardware Platform | C Series | C Series |
| Bus Connection | C Series | C Series |
NI-9361 Accessories and Software
- Model (Part Number)DescriptionImageCompatible Part NumbersSH37F-37M (778621-01)SH37F-37M-1 37-Pin Female to Male Shielded I/O Cable, 1 m783407-02, 783407-01DB37F-DB37M LP (154302-01)Low Profile I/O Cable, 37-pin Female DSUB to Male DSUB (1m)783407-02, 783407-01
- Model (Part Number)DescriptionImageCompatible Part NumbersNI-9923 (781503-01)NI 9923 Front-mount terminal block for 37-pin D-Sub Modules783407-02, 783407-01
- Product (Part Number)DescriptionRecommended use casesFlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
Resources
Support
Request support
You can request repair, schedule calibration, or get technical support. A valid service agreement may be required.
NI Discussion forums
Ask questions, explore solutions, and participate in discussions with other NI Community members.
Knowledgebase
Search for answers to frequently asked questions and troubleshooting tips for common errors written by NI engineers.
Online training
Access hundreds of self-paced lessons, application-focused learning paths, and get started with product set-up tutorials.